Sebo Automatic X4 Owner's Manual

TECHNICAL DETAILS M M~ PCB 12V power supply Plaquette alimentation 12V PCB computer controller Contrôleur électronique Servo motor 12V Servomoteur 12V Vaccum motor Moteur d‘aspiration Main switch Interupteur principal Filter housing Logement sac poussiére Handle tube Tube de manche Hall sensor Sonde de Hall 120V ~ ~ Reed contact swivel switch Contact à lames souples interrupteur joint Reed contact BOOST switch* Contact à lames souples interrupteur BOOST* *depending on model *Suivant les modèles U.S. Patents: 5,056,175 4,955,106 5,028,245 Technical Details 2 Wiring Diagram 2 How To Contact SEBO 2 Important Safety Instructions 3 ...

outlet when not in use and before servicing. 2. Do not use outdoors or on wet surfaces. 3. Do not use near small children or pets. Do not allow to be used as a toy. Use of this product by children should always be supervised by an adult. 4. Use only as described in this manual. Use only manufacturer-recommended attachments. 5. Do not use with a damaged cord or plug. If vacuum is not working as it should, has been dropped, damaged, left outdoors, or dropped into water, take it to a SEBO service center. 6. Do not pull or carry by cord, use cord as a handle, close a door on cord, or pull cord around sha ...

4 Designed for All Floor Surfaces. Automatic Height Adjustment for All Floors – Based upon the resistance of the brush roller against the floor, the power head automatically adjusts up or down to the appropriate cleaning height, providing optimal cleaning of all floor surfaces. The height adjustment chosen by the machine ensures aggressive brush action, while pro- viding optimal air flow. This prevents suffoca- tion of air flow due to improper height selec- tion. Never again manually adjust the brush height or use different vacuums for various floor sur- faces; the SEBO X cleans them all, automatically! Brush Adjustm ...

5 Designed and Manufactured in Germany – Legendary quality, reliability and performance make SEBO vacuums the first choice of cleaning professionals throughout the world. World’s Best Pet Vacuums – Because of superior power-head and brush-roller technology, SEBO vacuums are the world’s best for pet hair removal! Excellent for Users With Allergies or Asthma – The British Allergy Foundation recommends SEBO filters. Tightly Sealed Vacuums Ensure Effective Filtration – Dirty air, which flows through a vacuum, can only be filtered completely if it does not escape into the room through seams or seals in the m ...

attachments are available. The nine-foot extension hose (extends suction hoses) and the 20-inch extension wand (extends instant-use wands) are very popular because they create useful tools for cleaning stairs and out-of-reach areas. These two items are sold separately or as part of multiple item attachment kits. Another popular attachment is the hand-held Turbo brush for removing pet hair from upholstery. SEBO Ultra filter bags can be purchased in boxes of eight and filters are sold separately. Also, bags and filters can be purchased together in model-spe- cific kits called “Service ...

7 ASSEMBLY 1. Handle grip 2. On/Off switch 3. Handle assembly 4. Retaining ring 5. Cover release flap 6. Bag housing 7. Front cover 8. Housing release button 9. Power head with brush 10. Cable (cord) 11. Cleaning wand handle 12. Attachment hose 13. Handle catch 14. Carrying handle 15. Cable (cord) hook 16. Cleaning wand (active wand) 17. Crevice nozzle 18. Upholstery nozzle 19. Foot pedal 20. Swivel neck 21. Support lever 22. Protruding tab 23. Connecting tube Place the power head (9) on the floor with the swiv- el neck (20) and the support lever (21) upright. Hold the bag housing (6) vertically and place it over the swivel neck ...

Before turning on your vacuum cleaner, make sure that the vacuum handle is in its upright locked position and that you have a firm hold on the handle grip to keep the machine from moving forward. 1. Turn the quick release cable hook (#15, figure 1) to the up position by moving it to the left or right. 2. Release the power cord plug from the power cord and lift the cord off of the upper cord hook (#26, figure 2). 3. With the switch (#2, figure 2) in the “O” (OFF) position, plug the polarized power cord into a 120 volt outlet located near the floor. Switch Position O = OFF I = ON Operating ...

4, 5 & 6 The cleaning wand (16) is useful for vacuuming corners and hard-to-reach areas. The handle grip (1) should be in the upright, locked position (as shown in figure 4). Grip the cleaning wand handle (11), pull it up and away from the machine and stretch out the hose (12) until it locks to the back of the tube (this locking action will prevent the hose from retracting back into the cleaning wand while it is in use). Various attachments may be inserted onto the end of the tube. After use, remove attachment and re-insert the cleaning wand into the back of the machine. Be sure that the cleaning wa ...

To change the filter bag, pull the cover release flap for- ward (#5 on page 6) and lift the cover (7) from the bag housing. The cover release flap must remain in a forward “pulled-out” position to change filter bags and lock them into place. Squeeze the clamps on both sides of the filter bag sealing plate, slide the plate (28) from the holder (29) and push the cap on to seal the bag. Slide the sealing plate (28) of a new bag into the holder and push it in firm- ly. Re-insert cover into bag housing, push it forward, then lock it in place by pushing down the cover release flap. You may find it ...

Blockages in the hose can be cleared by removing the attachment hose (12) from the machine by squeezing the retaining ring (4) and inserting the oppo- site end of the hose in the connecting tube (23). Hold the hose upright with one hand blocking the top end and switch on the machine. If necessary, quickly lift your hand on and off the end of the hose. If this procedure does not clear the clog, a straight wire can be inserted into the hose to push out the clog. Take care not to puncture the hose with the wire. Clogs in the Airflow Pathway - Figure 15 Most clogs can be removed by accessin ...

or machine shuts off intermittently Bag full or clog light on or flashing & machine shuts off Brush light on Brush light slowly flashing Brush light flashing & machine shuts off Up & down lights flicker Does not pick up Front bag door won’t fully close Hose doesn’t retract after cleaning wand is inserted REASON 1. Handle not fully inserted into the bag housing, causing a faulty connection. 2. Not plugged into good outlet. 3. Cable worn. 4. Bag housing (6) not seated fully into proper “locked” position on top of power head. 1. Bag full. 2. Clog in airflow pathway, attach- ment hose, cleaning wan ...

#9570AM X4, #9580AM X5 White/Gray and #90506AM X4 BOOST Arctic White Machines Pos. Part # Description 1 5642AM Handle complete - gray black/white (incl. pos. 2 -13) 2 5297GSAM Handle grip (incl. pos. 3, 7+10) 3 5359GS Grommet 4 5450DG Power supply cord 5 05113 Switch w/screws 6 5160WE Switch cap - arctic white 7 5161GS Switch cap holder 8 5162 Cable clamp 9 0103 Screw C 3.9x16 DIN 7981 10 5253UL Wire-antistatic 11 5298ER Handle cable 12 0129 Screw M 4x12 DIN 966 13 5187 Handle tube 14 0102 Screw F 3.9x13 DIN 7981 15 5040SB Hose, cpl. 16 5045GS Cleaning wand 17 5707WE Cover - arctic white 18 5319 Bag holder ...

#9570AM X4 Arctic White/Dark Gray Machine Pos. Part # Description 100 5781SE Power head cover, complete (incl. pos. 101-103, 160, 161, 164) - white/gray black 101 5712WE Exhaust filter catch - white 102 5143 Exhaust filter 103 5711WE Exhaust filter cover - white 104 5729UL Swivel neck assembly incl. 105-108, 111 & 5328OR Slider 105 5176UL Male contact holder 106 0102 Screw F 3.9 x 13 DIN 7981 107 2494 Cable clamp 108 5101 Swivel neck bearing r. h. 109 5480 Swivel neck support r. h. 110 5479 Swivel neck support l. h. 111 5717 Swivel neck bearing l. h. 112 5848ER Power supply 100-120V 113 5205/1 Ribbon cable set 1 ...

#90504AM X4 BOOST Graphite Machine Pos. Part # Description 100 50799GS Power head cover, complete X4 BOOST - (incl. pos. 101-103, 160, 161, 164) - gray black/silver 101 5712GS Exhaust filter catch - gray black 102 5143 Exhaust filter 103 5711GS Exhaust filter cover - gray black 104 5729UL Swivel neck assembly incl.105-108, 111 & 5328OR Slider 105 5176UL Male contact holder 106 0102 Screw F 3.9 x 13 DIN 7981 107 2494 Cable clamp 108 5101 Swivel neck bearing r. h. 109 5480 Swivel neck support r. h. 110 5479 Swivel neck support l. h. 111 5717 Swivel neck bearing l. h. 112 5848ER Power supply 100-120V 113 5205 ...

#9580AM X5 Arctic White/Gray Machine Pos. Part # Description 100 5791SE Power head cover, complete - (incl. pos. 101-103, 165, 166, 169) - arctic white/gray black 101 5712WE Exhaust filter catch - white 102 5143 Exhaust filter 103 5711WE Exhaust filter cover - white 104 5729UL Swivel neck assembly (105-108 & 111) 105 5176UL Male contact holder 106 0102 Screw F 3.9 x 13 DIN 7981 107 2494 Cable clamp 108 5101 Swivel neck bearing r. h. 109 5178 Swivel neck support r. h. 110 5728 Swivel neck support l. h. 111 5717 Swivel neck bearing l. h. 112 5848ER Power supply 100-120V 113 5205/1 Ribbon cable 114 5713WE Brush rol ...