Vapotherm Oxygen Assist Module Quick Reference Manual

Text of the manual

Q U I C K R E F E R E N C E G U I D E

Oxygen Assist Module for Vapotherm Precision Flow® Systems Alarm Silence LED Alarm Silence Button Setting Control Knob Touchscreen Display On/Off LED On/Off Button This guide provides you with basic instructions on how to set up and operate the Vapotherm Oxygen Assist Module for Precision Flow® Systems. Before operat

%O2 Above Limit*

Increase %O2 Alarm Limit, or enter MANUAL mode Battery Backup In Use Oxygen Assist Module is in Battery Mode. When external power is lost, the module will automatically switch to Battery Mode Battery Low Plug the Oxygen Assist Module into external power Check Precision Flow Clear Precision Flow alarm and ensure it

INDICATIONS, WARNINGS AND CAUTIONS

Primary Indications: The Oxygen Assist Module is an optional module used only with the Vapotherm Precision Flow and is indicated for on-demand titration of oxygen into warm humidified breathing gases delivered to spontaneously breathing patients based on continuous non-invasive monitoring of blood oxygen saturation. The Oxy

100 Domain Drive

Exeter, NH 03833 T: 603-658-0011 USA 3101889 Rev B May be patented. www.vapotherm.com/patents Technical Support T: 855 557 8276 USA +1 (603) 658-5121 International [email protected] AJW Technology Consulting GmbH Königsallee 106 40215 Düsseldorf Germany Phone: +49 (0) 211 3013 2232 0297 SHUT DOWN GENERAL WARNINGS • For use on

More Vapotherm Medical Equipment Owners Instructions: