multicomp pro MP770291 Manual 

Text of multicomp pro MP770291 Manual 

Table of Contents

1. Overview.......................................................................................................................... 1 2. Specification ..................................................................................................................... 1 3. Operating environment ................................................................................................... 2 4. Operation ............................

The MP770291 clamp is a current probe for oscilloscope which uses a Hall effect cell for the

measurement of DC or AC current without modification of the installation (without switching off the circuit) It can measure currents from 50 mA to 100 A peak. It has 2 ranges and 2 lights indication: -“ON”, correct power supply to the clamp. -“OL”, overload of the range in use (saturation or peak). In addition, a thumbwheel can be used to reset

multicomp pro MP770291 3. Operating environment

1). Operating. Temp:0~+50℃ 2). Storage. Temp:-3~+80℃ 3). Operation relative humidity: +10℃~+30℃:85±5% relative humidity(non-condensing): +40℃~+50℃:45±5% relative humidity(non-condensing) 4). Operating height:0~2000m 4. Operation 1). To make a current measurement, switch on the clamp by selecting the 100mV/A range. Check that the battery indicator (green) is lit and that the <
    >indicato

multicomp pro Measuring Instruments Owners Instructions: