Overland Storage NEO Series Remove & Replace Instructions

08/2007 ©2007 Overland Storage, Inc. � Page 1 of 3 IMPORTANT: Overland Storage requires that all NEO Series parts be removed and replaced by an Overland Storage authorized service provider. Improper installation may result in damage which voids existing warranties. This document describes how to remove and replace the Rotary SPI ...

08/2007 ©2007 Overland Storage, Inc. � Page 2 of 3 3. Remove the grounding lug for the Baseplate Power/ Control flex chain. NOTE: Early models had a self-locking 7mm hex nut on the other side of the mounting bracket. Remove and retain. 4. Cut both the mounting bracket and flex chain cable ties (Figure 3). 5. Moving the cables asid ...

08/2007 ©2007 Overland Storage, Inc. � Page 3 of 3 1. Reattach the lower right rear access panel. 2. Reinstall the drives (or drive covers) and dividers in drive bays 1–4 and set aside. 3. Reattach the power cords. 4. Set the library circuit breakers to the ON (“|”) position. Wait while the library completes its POST program ...