Quantex ScanDoc Compact Instruction Manual
Text of the manual
QUANTEX GmbH 2014
Introduction
3
Safety precautions and warnings
4
Installation
5
Minimum system hardware requirements
5
Program installation
5
Connection
6
On-line activation
8
ScanDoc program description
10
Program settings
10
Main menu
13
Identification
13
Diagnostic Trouble Codes
14
Hot keys
30
Manufacturer
31
A multi car diagnostic scanner ScanDoc Compact is used for the information
readout from the car engine control modules (ECM) via the diagnostic outlet
OBD-II.
Functionality
•
Reading and error codes decoding.
•
Errors reset.
•
Display of current data both in digital and graphical formats.
•
Final controlling drives actuation.
•
Sys
Safety precautions and warnings
Read this instruction manual first and then use the device. Make sure you’re
aware of the instruction manual information. The Manufacturer isn’t responsible for
accidents involving injuries, except equipment manufacturing defects.
4
QUANTEX GmbH 2014
Poisoning
Test an operative vehicle in a well ventilated work area. The e
To start, do the following:
Step 1 -
Make sure your PC meets the system hardware requirements.
Step 2 -
Install the ScanDoc program to your PC.
Step 3 -
Connect the adapter to the car and the PC.
Step 4 -
Activate the device on-line.
The device is ready for service.
Step 1 - Minimum system hardware requirements
•
CPU Intel Core 2 Duo 2 GHz.
�
Step 3 - Connection
1. Connect ScanDoc Compact to the car diagnostic outlet OBD-II.
2. Connect to the PC via the wireless network Wi-FI. Select QUANTEX in the Wi-
FI connections list available on the PC.
This is the easiest way to connect.
Note: This option within the Wi-Fi device unit is default
6
QUANTEX GmbH 2014
Wi-Fi
Guest
Quantex
Connect 2
If the adapter is connected to the PC successfully, there will be a green indicator,
showing the robust connection to the adapter. To make sure the scanner ScanDoc
Compact is connected to your PC, select the button Connection Test in the tab
Options.
Connection via Wi-Fi with internet access point
If it ‘s necessary to work with several devices via wirel
QUANTEX GmbH 2014
Step 4 - On-line activation.
To activate, do the following:
1. Connect ScanDoc Compact to the car diagnostic outlet OBD-II.
2. Connect to the PC via the wireless network Wi-Fi.
3. Select the button Get key in the tab Options (The PC should be connected to
the Internet).
4. If the program and remote server are connected successfully, a me
There are the reset switch to factory settings.
The device condition is shown by inboard LED indicators. They are on after the
power is supplied to the device and the integral test is run.
Device power supply
ScanDoc Compact gets the power supply from the car diagnostic outlet OBD-II.
Possible Reasons for Power Supply Absence:
•
The adapter is pu