Sharp Carousel SMC1662DS Operation Manual
Text of Sharp Carousel SMC1662DS Operation Manual
Read all instRuctions caRefully befoRe using the oven.
C O N T E N T S
•� For�Customer�Assistance�.....��2
•� Precautions�to�Avoid�Possible�
�
Exposure�to�Excessive�
�
Microwave�Energy��....................���2
•� Consumer�Limited�Warranty�....................... �
3
•� Important�Safety�Instructions�..................... �
4
•� Federal�Communication�Commission�Radio�
�
To aid in reporting this microwave oven in case of loss or theft, please record below the model number and serial
number located on the unit. We also suggest you record all the information listed and retain for future reference.
MODEL NUMBER _______________________ SERIAL NUMBER _____________
DATE OF PURCHASE ______________________
DEA
SHARP ELECTRONICS CORPORATION warrants to the first consumer purchaser that this Sharp brand
product (the “Product”), when shipped in its original container, will be free from defective workmanship and
materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or
part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the
period(s) set forth below.
This
Sharp Carousel SMC1662DS SAVE THESE INSTRUCTIONS
I M P O R TA N T S A F E T Y I N S T R U C T I O N S
11. Read all instructions before using the appliance.
12. Read and follow the specific “PRECA
Sharp Carousel SMC1662DS This equipment generates and uses ISM frequency energy and if not installed and used properly, that is in
strict accordance with the manufacturer's instructions, may cause interference to radio and television
reception.
It has been type-tested and found to comply with limits for an ISM Equipment pursuant to part 18 of FCC
Rules, which are designed to provide reasonable protection against such interference in a residential
installation.
However, th
Sharp Carousel SMC1662DS Check for damage such as a misaligned door, broken door or dent in the cavity.
If any damage is visible, DO NOT INSTALL, and notify your dealer immediately.
2. Level,�flat�location.
Install the microwave oven on a level, flat surface.
3. Ventilation.
Do not block air vents. If they are blocked during operation, the oven may overheat and eventually cause a
failure.
For proper ventilation, allow 4 inches
S P E C I F I C AT I O N S
POWER SUPPLY
120V AC, 60Hz SINGLE PHASE WITH
GROUNDING
MICROWAVE
INPUT POWER
1550 W
ENERGY OUTPUT
FREQUENCY
2,450MHz
OUTSIDE DIMENSIONS (W x D x H)
CAVITY DIMENSIONS (W x D x H)
CAVITY VOLUME
NET WEIGHT
APPROX. 37 lbs.
TIMER
POWER SELECTIONS
10 levels
* Specifications are subject to change without notice.
99 min. 99 sec.
15.5 x 17.1 x 10.2 in.
1100 W
1.
21.8 x 17.7 x 12.8 in.
6 cu.ft.
21.8 in
12.8 in
17.7 in
7
1�Door�latch�-�If the door is opened while
the oven is operating, the magnetron
will automatically shut off.
2�Door�seal�-�The door seal surfaces prevent
microwaves escaping from the oven cavity.
3�Oven�cavity
4�Oven�lamp�-�Automatically turns ON when
oven door is opened and during operation.
5�Safety�interlock�system�
6�Control�panel
7
8
�Waveguide�cover�-�Protects the microwave
outlet from splashes of cooki
1�DISPLAY� -� Cooking time, power level,
indicators and current time are displayed.
2�
3�
4�
5�POWER LEVEL�-�Used to set power level.
6�
TIME�DEFROST�-�Used to defrost foods for
time.
7�
POPCORN�PAD�-�Press to select
8�
COOK MENU�-�Used to select a
Sensor
9�
NUMBER BUTTON�-�
time, kitchen timer, etc.
0�
kITCHEN�TIMER�-�Used as a minute timer,
delay cooking, hold setting after cooking.
q�
w�
STOP�
Plug power supply cord into a standard 3-pronged
14 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container, open
the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is firmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation.
Each time a pad is touched, a BEEP wil
SETTINg THE CLOCK
When the oven is first plugged in, the display will show “0:00” and a tone will sound. If the AC power ever goes
C O N T R O L S
KITCHEN TIMER MODE
Timer operates as a minute timer.
Timer operates without microwave energy.
The TIMER indicator starts blinking and the display counts down the time remaining in KITCHEN TIMER mode. When
KITCHEN TIMER mode ends, you will hear 5 beeps.
CLOCK
2) Press the number keys to program current time.
C O N T R O L S
TIME COOK" once, the display will show "00:00".
POWER LEVEL " once, the display will show "PL10". The default power is 100% power. Now you
can press number keys to adjust the power level.
START/+30SEC." to start cooking.
(1) Press "
(2) Press number keys to input the cooking time; the maximum cooking time is 99 minutes and 99 seconds.
(3) Press "
(4) Press "
Note:
In the process of setting, if the " START/+30SEC.
t
AUTO DEFROST lets you easily defrost food by eliminating guesswork in determining defrosting time.
Follow the steps below for easy defrosting.
The defrosting time is automatically determined by the weight selected.
When the defrosting time ends, you will hear 5 beeps.
C O N T R O L S
(1) Press "
DEFROST ," LED will display "0.0".
(2) Press number buttons to input weight to be defrosted. The weight must be
between
(3) Press " START/+30SEC. " to sta
C O N T R O L S MEMORY FUNCTION
(1) Press "0/MEMORY" repeatedly to choose memory setting 1-3. The display will show 1,2,3.
(2) If the setting has been program
ed, press " START/ +30 SEC." to use it. If not,
with your favorite program.
Example: to program the following setting as the second memory to cook food with 80% microwave power
for 3 minutes and 20 seconds.
The steps are as follows:
a. In waiting state, press "0/MEMORY" twice, the screen displays "2"
C O N T R O L S SENSOR COOK
d.The reheat food can be covered with the lid, but the lid must have a venthole in order to
emanate the steam. Sealed utensil is forbidden.
1) In waiting state,
, press the menu key in the sensor cook
.
2) Press "START/+30SEC" to start sensor reheat function and no need to set time.
3) The sensor will sound twice when the steaming is emanated.The surplus time will display,
the buzzer will sound 5 beeps when finishing. At