Walker Edison D44MIR Assembly Instructions Manual
Text of Walker Edison D44MIR Assembly Instructions Manual
Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
Please visit our website for the most current instructions, assembly tips, report damage,
or request parts. www.walkeredison.com
Revised 20/10/2020(I)
®
Walker Edison
TM
Assembly Instructions
Item # : D44MIR
General Assembly Guidelines
I. Ensure that all parts and hardware are available before beginning assembly.
II. Follow each step carefully to ensure the proper assembly of this product.
III. Two people are recommended for ease in the assembly of this product.
IV. The main type of hardware used to assemble this product are: bolts and screws.
V. Power tools should not be used to assemble this product.
P.2
VI. Drill may be nee
The hardware quantities listed above are required for proper assembly.
Some extra hardware may also have been included.
A
B
C
M6x27mm
Bolt
6
Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
pcs
2
pcs
8
M6x15mm
Bolt
Bolt
pcs
D
M 4
Hex key
1
pc
M6X45mm
E
Bolt
9
pcs
M6x12mm
Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
Version A
Version B
Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
E
E
3
4
D
Using bolt (E) attach part (4) to part (3) with Hex Key (D) as per diagram.
Copyright © 2020, by Walker Edison Furniture Co., LLC. All rights reserved.
D
6
5
E
Using bolt (E) attach part (5) to part (6) with Hex Key (D) as per diagram.
Note: Do not fully tighten all bolts.