Rohnson R-028 Instruction Manual

WITH Wi-Fi INSTRUCTION MANUAL MODEL: R-028 This product is only suitable for well insulated spaces or occasional use. ...

attached safety regulations before use. Please also save the instruction manual in case you need to remind yourself of the heater’s functions at a later date. Technical Specification Details R-028 Voltage 220-240V~ Frequency 50Hz Power 1000/2000W IP Waterproof IP24 Important Before plugging the unit into the mains, ensure by visual inspection that the unit is intact and has not suffered any damage during transit. Caution The appliance must be always placed on a flat and stable surface. In order to avoid a hazard due to inadvertent resetting of the ther ...

12. Do not let animals or children touch or play with the heater. Pay attention the air outlet gets hot during operation. 13. Do not cover. If covered, there is the risk of overheating. 14. Do not use this heater in the vicinity of showers, bath tubs, wash basins or a swimming pool etc. 15. Do not use the heater in the rooms containing explosive gas inflammable solvents, varnish or glue. 16. Keep the heater clean. Do not allow any objects to enter any ventilation or exhaust opening as this may cause electric shock, or fire or damage to the heater. 17. If the heater has been dropped or da ...

Standard: IEEE 802.11 b/g/n Antenna Type: PCB Antenna Frequency WIFI: 2.4GHz Maximum Transmitted Power: 18dBm Max Dimension: 920*240*430(mm) Operation Temperature: 0°C~45ºC / 32ºF~113ºF Operation Humidity: 10%~85% Power lnput: 220-240V AC, 50/60Hz Producer: Ningbo Panel Electric Appliance Co., Ltd Address: No.255, Lvyuan 1st Road, Chongshou Town, Cixi, 315334 Ningbo, China Tel: 86-574-63085895, Fax: 86-574-63860299 SIMPLIFIED EU DECLARATION OF CONFORMITY Hereby, Ningbo Panel Electric Appliance Co., Ltd, declares that the radio equipment type of R-077 is in compliance with Directive 2014/53/EU. The full text ...

Please note that the product must be installed at least 15 cm from the floor and 50 cm from the ceiling. -For wall mounting study scheme 1.Uninstall the bracket from the body,see the image1 2.Drill the holes at each sides on the wall,then insert the plastic expanded plugs within, Fix the bracket in the wall with screw,see the image2 3.Fit the heater into suitable position ensuing that the holes align with bracket.see image3 4.Tight the screw on the top of bracket to catch steady Operation Insert the plug into a suitable socket outlet on an A.C. power supply having the same voltage as that shown on ...

Press “ ” to set functions. The upper part of the display shows the room temperature The heater is working at low power heating conditions. Mode Press “ ” to regulate low , or high temperature power Temperature Internal temperature is displayed every time the appliance is started up. The temperature can be set when the appliance is in stand-by or heating. When the room temperature reaches the set level, the high temperature power stops and the low temperature power remains active. When room temperature is 2 degrees over the set temperature, both the high and l ...

” will be display on the screen, so you cannot make any operate and same ways to touch to delete the child clock function. Please scan QR code for download Please download Rohnson APP from Rohnson APP for Android as below. APP Store for IOS mobile device. Connection by WIFI 1.Use your phone to scan the QR code below or search “Rohnson” App in Play store or App store. Download and install the Rohnson App. 2.Select your country code, enter the cellphone number and tap “Get” to get a message containing verification on code. 3.Enter the verification on code in t ...

B) Press the “confirm indicator rapidly blinks” when the indicating light on device rapidly blinks, as shown in pic 3 C) Input password of WIFI and then confirm, as shown in pic 4 D) Wait for the APP to connect with the device until it is connected successfully .as shown in pic 5 Pic 2 Pic 3 ...

Operation by WIFI 1. You can operate the device by mobile under WIFI or 4G LTE environment, as shown in the picture 6, Pic 6 Pic 7 ...

2.Select “Weekly timer” button to operation: Press the “Add timer”, as shown in pic 7 You can choose the weekly and timer what you want, pls note that you must keep the set temperature higher the currently temperate when ON the power as shown in pic 8 Press the “Save” button in top right corner to save this during “stop or start” weekly timer operation, as shown in pic 9. Once again operation to set the next during “stop or start” weekly timer. Press the “back” button in top left corner to check the record what you set. Long time touch the record you can make choice to cancel. Opera ...

EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative consequences for the environment and health, deriving form inappropriate disposal and enables the constituent materials to be recovered to obtain significant savings in energy and resources. As a reminder of the need to dispose of household appliances separately, the product is ...

control [no] electronic room temperature control plus day timer [no] electronic room temperature control plus week timer [yes] Other control options (multiple selections possible) Room temperature control with presence detection [no] Room temperature control with open window detection [no] With distance control option [yes] With adaptive start control [no] With working time limitation [no] With black bulb sensor [no] Contact details: VASSILIAS S.A. ...