Rohnson R-032 Instruction Manual

READ THE INSTRUCTIONS BEFORE USE. I . Safety tips (A) Safety instructions: 1. When the electric blanket is folded, crumpled or used abnormally the electric blanket can overheat which will activate the permanent protection function. This cannot be repaired at home and must be returned to the manufacturer. 2. When the power for the electric blanket is lower in voltage than recommended, the temperature of the blanket rises slowly, and the heating ability is relatively low. This situation is not a malfunction of an electric blanket, and users should pay attention to checking the voltage of the power ...

not be used by persons insensitive to heat and other very vulnerable persons who are unable to react to overheating。 (Fig.5) 6. Do not turn on the electric blanket when there is any folded bedding or heavy objects on it, so as not to cause the electric blanket to overheat. (Fig.6) 7. Do not expose the electric blanket to direct sunlight. Do not roast and do not iron the electric blanket. Avoid any damage to the insulation of the heating wires. (Fig.7) 8. Do not use together with any other heating appliances (such as foot warmer, hot- water bottle). (Fig.8) 9. D ...

program for sensitive clothing. ·Only use the spin program for sensitive clothing. DO NOT PERFORM an additional spin cycle. It is proposed to wash the product in the washing machine for maximum 2 times per year to ensure the maximum life span of the product. When not in use, the electric blanket should be stored in a dry place. When storing the appliance, allow it to cool down before folding. Do not crease the appliance by placing items on top of it during storage. After storing, the blanket should be carefully checked before use to make sure the contr ...

default 8 hours. The temperature can be adjusted in 5 levels,5/4/3/2/1/5 button circulation Setting 5, setting 4, setting 3 for pre-heat fast for 15 minutes, if don’t need fast heat any more, button “Cancel”, then button “Temperature” to Constant temperature state. If you turn on the controller and set no specific setting, it defaults to setting 5 and after 3 hours of operation, it will change to setting 3. ● Humanized design: To avoid too hot ,after working on “setting 5” or “setting 4” 3 hours, system can change from setting 5 or setting 4 to ...

the plug), before checking for damage. VI REPAIRATION: ATTENTION: THIS PRODUCT CANNOT BE SELF SERVICED AND CAN ONLY BE FIXED BY PROFESSIONAL WORKERS, OR CONTACT WITH FACTORY TO GET FIXED. IMPORTANT INFORMATION FOR CORRECT DISPOSAL OF THE PRODUCT IN ACCORDANCE WITH EC DIRECTIVE 2002/96/EC. At the end of its working life, the product must not be disposed of as urban waste. It must be taken to a special local authority differentiated waste collection centre or to a dealer providing this service. Disposing of a household appliance separately avoids possible negative ...