Danfoss TP75-RF Instructions

After the recessed RESET button has been pressed the display appears as shown, with the colon blinking, and all the factory pre-set conditions will be present. To set the clock to the correct time, press and release the button marked PROG. The digits blink. Press the DAY button (the digits stop blinking) until the corre ...

The TP75-RF range of programmable room thermostats are provided with a factory pre-set programme of switching times and temperatures, so that, once the clock has been set and the TP75-RF returned to the RUN mode, the heating system will be controlled at the times and to the temperatures of the pre-set programme, as shown in the foll ...

Select a °C or a °F temperature display. Change between Winter Time and Summer Time at the press of a button. Convert the TP75-RF to act as a thermostat, controlling at the selected temperature continuously. Use the TP75-RF as a frost thermostat. Use the holiday function. Override the progra ...

+ 2 HR + 3 HR SETTING THE CLOCK Press PROG to display the time of day (the display blinks). Press DAY (the display stops blinking) to select today (1 = Monday, 6 = Saturday etc).Press and hold down the + or - button to change the time quickly in ten minute steps, or press and release to change the time by one minute. When the day and time are correct, ...