Fujitsu ScanSnap S1300 Getting Started Manual
Text of the manual
Thank you for purchasing ScanSnap S1300 (hereinafter referred to as "the ScanSnap").
This manual describes the preparation required for use of the ScanSnap. Follow the preparation procedures
described in this manual.
Make sure to read the "Safety Precautions" document provided with the ScanSnap before use.
For details about S
The provided "Safety Precautions" document
contains important information about the safe use of
the ScanSnap. Before using the ScanSnap, make
sure to read and understand the information provided
in the "Safety Precautions" document.
Symbols Used in This Manual
The following symbols are used in this manual.
Referring to the "Operator's
Gu
1. Turn on the computer and log on as a user
with Administrator privileges.
2. Insert the Setup DVD-ROM into the DVD-
ROM drive.
D The [ScanSnap Setup] dialog box appears.
3. Click the [Install Products] button.
D The [Welcome to the InstallShield Wizard for
ScanSnap] dialog box appears.
4. Click the [Next] button.
D The [ScanSnap Setup] dialog box appears
This explains how to install ScanSnap software on a
Mac OS (Mac OS X v10.5).
■Software
You can install the following software. For details
about each software, refer to "Installing the Software"
in the Operator’s Guide.
z ScanSnap Manager (Scanner driver)
z ABBYY FineReader for ScanSnap (OCR
software)
z Cardiris (Business card text-recognized software)
D The installation is started.
D The Cardiris installation window appears.
10. Scroll down and read the "License" to the
end. Then, click the [Continue] button.
D A confirmation message window appears.
11. Click the [Agree] button.
D The [Select Destination] window appears.
D By default, Cardiris is installed in the
Applications Folder.
12. Click the [Cont
3. Connect cables to the ScanSnap.
z Using the Power Cable
1. Connect the power cable
to the power
connector of the ScanSnap and plug in the
AC outlet.
2. Connect the USB cable
to the USB con-
nector on the ScanSnap and the USB port on
your computer.
z Using the USB Bus Power Cable
1. Connect the USB bus power cable
to the
power connector on the ScanSna
5. Check the ScanSnap Manager icon.
D The ScanSnap Manager icon appears on the
taskbar.
D The ScanSnap Manager icon appears in the
Dock.
D Connecting the ScanSnap to your computer is
complete. Proceed to "Scan Test" (page 7).
Scan Test
After installing the software and connecting the
ScanSnap and computer, use ScanSnap Manager
and check that documents can
2. Press the [Scan] button on the ScanSnap.
D Scanning starts.
D The Quick Menu appears when scanning is
completed.
3. From the Quick Menu, click an icon for the
item to be performed.
D The selected item is performed. When the
ScanSnap is interacting with an application,
the application window appears.
D Confirm that the function selected from the Quick
Me