Radio Shack Electronic Subwoofer Crossover Owner's Manual
Text of the manual
OWNER’S MANUAL — Please read before using this equipment.
© 2000 Tandy Corporation. All Rights Reserved.
RadioShack and RadioShack.com are trademarks
used by Tandy Corporation.
Electronic Subwoofer Crossover
Your Electronic Subwoofer Crossover is de-
signed to give you excellent control over the
sound produced by your autosound system.
The crossover dir
• does not interfere with the operation of
the vehicle
• is not directly in front of a heating vent
• allows drilling of mounting holes without
damaging other vehicle components
• allows convenient and safe routing of
wires
Connecting Input/Output
Note: Be sure to correctly match the input and
output connections (left output to left input,
and righ
3. Connect the autosound system speaker
wires to the crossover, carefully matching
polarity (L+ to L+, L– to L–, R+ to R+, and
R– to R–).
4. Connect the crossover’s L (left) and R
(right) OUTPUT jacks to the L (left) and R
(right) inputs of the amplifier that drives
the subwoofer speakers.
Connecting Power
1. Ensure the negative (–) cable is di
Printed in China
bility, set the INPUT LEVEL controls past their
midpoints.
Adjusting the Subwoofer Bass
Boost
The SUBWOOFER BASS BOOST controls let
you boost 45, 80, or 120 Hz subwoofer output
by 12 dB to enhance low sounds when de-
sired. Slide the 45 Hz/80 Hz/120 Hz selector to
the appropriate position, then slide +12dB to
ON. To return to t