Rega Brio Integrated Amplifier Owner's Manual
Text of Rega Brio Integrated Amplifier Owner's Manual
Contents
Introduction.............................................................................1
Installation...............................................................................2
Input Connections................................................................3-5
In Use......................................................................................5
Specifications..........................................................................
Your REGA amplifier has been designed to reproduce music
effectively and easily.
The Brio has been built to Rega's discriminating standards of
reliability and quality to ensure many years of musical enjoyment.
An amplifier's function is to boost the tiny signal generated by a
cartridge or other source so that it can drive loudspeakers. It is vital
that the amplifier achieves this without changing the signal and so
distorting the music.
We ha
All the inputs and the tape outputs are made via RCA (Phono) type
connectors. The sockets on Rega amplifiers are clearly marked left
and right.
Right: always the lower row and marked in RED
Left: always the upper row and marked in WHITE
IMPORTANT: ALWAYS TURN OFF THE AMPLIFIER WHEN CHANGING LEADS
ESPECIALLY SPEAKER CABLES.
Rear Panel Connections
Earthing: Earthing is done via the Phono socket ground for Rega
turntables so a separate
We recommend using good quality cable such as our own, or similar
types made by QED or Naim. Very expensive cable claiming to use
special materials and technologies along with "solid core" or OFC
types are not recommended. Try to keep cable runs to either speaker
of similar length. Your Rega dealer will be able to make up specific
lengths of cable for you with plugs (where required) already fitted.
Never join cables together to increa
(No power, power switch LED does not light up)
Is the mains
supply connected
and the socket
switched on?
Is the front panel
power switch fully
depressed?
Has the fuse in the mains
plug blown? (plug in another
appliance to check)
Contact your Rega Dealer
Correct the fault
NO
YES
YES
Contact your
Rega Dealer if it
appears faulty
Replace fuse in plug
YES
YES
NO
Is the mains socket live?
(plug in another appliance to
check)
NO
NO
Check hous
(Power on, sound from one speaker only)
Are the connections between
the speakers and the amplifier
secure and functioning
correctly?
Are both channels of
the speaker connected
and working properly?
Are the cartridge
connections at the head
shell functioning? Check
cartridge tags
The speaker is
at fault
Contact your Rega Dealer
NO
NO
NO
YES
YES
YES
YES
NO
Check the source
component for faults. Swap
the output leads and check to
see if t
11
12
Owners Log
(1)
Owner.......................................................................................
Date..........................................................................................
Where Purchased.....................................................................
.................................................................................................
(2)
Owner...........................................................