Rega Ear Headphone Manual
Text of Rega Ear Headphone Manual
Rega Ear Headphone Maximum output level into 32 ohm load ...................................................... 525 mW
Input sensitivity for maximum output into 32 ohm ........................................ 331 mV
Input level for 250 mW into 32 ohm load ...................................................... 230 mV
Maximum output level into 600 ohm load ...................................................... 55 mW
Input sensitivity for maximum output input
Finally, you may use the Ear in between a pre-amplifier and power
amplifier input. The Ear will amplify any signal fed to the Cursa pre-
amplifier output and the link will feed the Maia/Exon power amplifiers.
The volume control on the pre-amplifier will control the headphone level
and the main speakers can be muted via the Ear.
How?
Connect the two sockets on the back marked INPUT (Red = Right, Black
= Left) to the pre-amplifier output sockets on
Used in between the amplifier pre-amp output and power amplifier input
- the Ear will amplify any signal fed to the pre-amplifier output sockets of
the Mira and Luna amplifiers. The volume on the amplifier will control the
headphone level and the main speakers can be muted via the Ear.
How?
Connect the two sockets on the back marked INPUT (Red = Right, Black
= Left) to the pre-amplifier output sockets on the back of the main
amplifier. The two soc
The Ear can act as a stand alone amplifier that will amplify any
signal fed into the input sockets.
How?
Connect the two sockets on the back marked INPUT (Red = Right, Black
= Left.) to the source output sockets (CD, Cassette, Tuner etc.) The
sockets on the back marked LINK (Red = Right, Black = Left) could be
used to feed the signal to another amplifier if required. The volume
control on the Ear may be used to adjust the level of the headphones.