Sharp R-409YK Operation Manual
Text of Sharp R-409YK Operation Manual
Sharp R-409YK READ ALL INSTRUCTIONS CAREFULLY BEFORE USING THE OVEN.
C O N T E N T S
• For Customer Assistance ..... 2
• Precautions to Avoid Possible
Exposure to Excessive
Microwave Energy .................... 2
• Consumer Limited Warranty .......................
3
• Product Information Card ...........................
3
• Important Safety Instructions .....................
4
• Federal Communication Commission Radio
Frequency Interference Statement
IMPORTANT! Register within 10 days of purchase.
Register ONLINE at www.sharpusa.com/productregistration
To aid in reporting this microwave oven in case of loss or theft, please record below the model number and serial
number located on the unit. We also suggest you record all the information listed and retain for future reference.
MODEL NUMBER _______________________ SERIAL NUMBER _____________
DATE OF PURCHASE ______________________
DEALER __________
SHARP ELECTRONICS CORPORATION warrants to the fi rst consumer purchaser that this Sharp brand
product (the “Product”), when shipped in its original container, will be free from defective workmanship and
materials, and agrees that it will, at its option, either repair the defect or replace the defective Product or
part thereof with a new or remanufactured equivalent at no charge to the purchaser for parts or labor for the
period(s) set forth below.
Th
When using electrical appliances, basic safety precautions should be followed, including the following:
WARNING-To reduce the risk of burns, electric shock, fire, injury to persons or exposure to excessive
microwave energy:
11. Read all instructions before using the appliance.
12. Read and follow the specific “PRECAUTIONS TO
AVOID POSSIBLE EXPOSURE TO EXCESSIVE
MICROWAVE ENERGY” found on page 2.
13. This appliance must be grounded. Connect only to
pr
This equipment generates and uses ISM frequency energy and if not installed and used properly, that is in
strict accordance with the manufacturer's instructions, may cause interference to radio and television
reception.
It has been type-tested and found to comply with limits for an ISM Equipment pursuant to part 18 of FCC
Rules, which are designed to provide reasonable protection against such interference in a residential
installation.
However,
1. Examine the oven after unpacking.
Check for damage such as a misaligned door, broken door or dent in the cavity.
If any damage is visible, DO NOT INSTALL, and notify your dealer immediately.
2. Level, flat location.
Install the microwave oven on a level, fl at surface.
3. Ventilation.
Do not block air vents. If they are blocked during operation, the oven may overheat and eventually cause a
failure.
For proper ventilation, allow 3 inches of space
Sharp R-409YK S P E C I F I C AT I O N S
POWER SUPPLY
120V AC, 60Hz SINGLE PHASE WITH
GROUNDING
MICROWAVE
INPUT POWER
1400 W
ENERGY OUTPUT
1000 W
FREQUENCY
2,450MHz
OUTSIDE DIMENSIONS (W x H x D)
22.2 x 12.5 x 16.4 in.
CAVITY DIMENSIONS (W x H x D)
15.0 x 9.7 x 15.2 in.
CAVITY VOLUME
1.3 cu.ft
NET WEIGHT
APPROX. 34.2 lbs.
TIMER
59 min. 99 sec.
POWER SELECTIONS
11 Levels
* Specifications are subject to change without notice.
Sharp R-409YK 1 Door latch - When the door is closed, it will
automatically shut off. If the door is opened
while the oven is operating, the magnetron
will automatically shut off.
2 Door seal - The door seal surfaces prevent
microwaves escaping from the oven cavity.
3 Oven cavity
4 Oven lamp - Automatically turns on during
oven operating.
5 Safety interlock system
6 Control panel
7 Door open button - To open the door push
the door open button.
8 Waveguide cover - Prot
1 DISPLAY - Cooking time, power level,
indicators and current time are displayed.
2 AUTO COOK - Used to cook or reheat
many of favorite food.
3 ONE TOUCH COOK - Used to cook or
reheat specifi c quantites of food.
4 DEFROST - Used to defrost foods for time.
5 POWER - Used to set power level.
6 MORE Pad - Press to add an extra cooking
time during working.
7 LESS Pad - Press to subtract an extra
cooking time during working.
8 Auto Defrost Pads - Press
Plug power supply cord into a standard 3-pronged
12 Amp, 120V AC 60Hz power outlet.
After placing the food in a suitable container, open
the oven door and put it on the glass tray.
The glass tray and roller guide must always be in
place during cooking.
Close the door. Make sure that it is fi rmly closed.
The oven light is on when the microwave oven is
operating.
The oven door can be opened at any time during
operation by pushing the door open button of
SETTING THE CLOCK
When the oven is fi rst plugged in, the display will show “:0” and a tone will sound. If the AC power ever goes off,
the display show “ : 0” when the power comes back on.
1. Touch the CLOCK pad.
This is a 12 hour clock system.
2. Touch the CLOCK pad once more.
This is a 24 hour clock system.
3. Enter the correct time of day by
touching the TIME SET pads in
sequence.
4. Touch the CLOCK pad.
NOTE: If you attempt to enter an i
C O N T R O L S
HOW TO USE TO DELAY THE START OF COOKING
1. Touch KITCHEN TIMER pad.
2. Press the amount of time you want to delay.
3. Program the desired power level and cooking time for
food to be cooked.
4. Touch START pad.
The TIMER indicator lights and “ : 0” is displayed.
The display will show what you touched.
The M/W indicator lights and the selected power
level & cooking time are displayed.
When you touch START pad, the TIMER indicator sta
AUTO DEFROST lets you easily defrost food by eliminating guesswork in determining defrosting time.
Follow the steps below for easy defrosting.
1. Touch MEAT pad.
2. Select the desired defrosting weight.
(Refer to the weight defrost chart below.)
3. Touch START pad.
The lb indicator light and “ 1.0 ” is displayed.
The display will show what you touched.
MEAT DEFROSTING begins.
The defrosting time is automatically determined by the
C O N T R O L S NOTE: Your oven can be programmed for
59 minutes 99 seconds. (59 : 99)
TIME DEFROSTING
When DEFROST is selected, the automatic cycle divides the defrosting time into periods of alternating
defrost and stand times by cycling on and off.
1. Touch DEFROST pad.
2. Touch number pads for the desired
defrosting time.
3. Touch START pad.
The DEF indicator lights and “ : 0” is displayed.
The display will show what you touched.
When you t
COOKING IN ONE STAGE
1. Touch POWER pad.
(Select the desired power level.)
2. Touch number pads for the cooking time.
3. Touch START pad.
X6
The M/W indicator lights.
The display will show what you touched.
This example shows power level 5.
The display will show what you touched.
NOTE : If steps 1 and 2 are omitted, the
oven will cook at full power.
NOTE : Your oven can be programmed for
59 minutes 99 seconds. (59 : 99)
2. Touch number pads for th
1. Touch the +30 sec pad.
When you touch the +30 sec pad, “:30” is
displayed, and the oven starts reheating
+30 SEC
+30 sec allows you to reheat for 30 seconds at 100% (full power) by simply touching the +30 sec pad.
By repeatedly touching the +30 sec pad, you can also extend reheating time to 5 minutes by 30 second
increments.
1. Touch BEVERAGE pad once for 1
cup, twice for 2 cups or three
times for 3 cups.
When you touch BEVERAGE pad once, “
NOTE : 1. Use prepackaged room-temperature microwave popcorn.
2. Place bag in oven according to manufacturer’s directions.
3. Pop only one bag at a time.
4. After popping, open bag carefully: popcorn and steam are extremely hot.
5. Do not reheat unpopped kernels or reuse bag.
6. Do not leave oven unattended while popping popcorn.
CAUTION : If prepackaged popcorn is of a different weight than the recommended weight, do not use the
popcorn pad. F
Sharp R-409YK To alter onetouch cooking or cooking time whilst oven is in operation, use LESS or MORE.(except for defrosting)
Press LESS/MORE to decrease/increase the onetouch cooking time in multiples of 10 second.
The overall onetouch cooking time can be increased to a maximum of 59 minutes 99 seconds.
Press LESS/MORE to decrease/increase the cooking time in multiples of 1 minute.
The overall cooking time can be increased to a maximum of 59 minutes.
CHIL
Turn the oven off before cleaning.
Keep the inside of the oven clean. When food
spatters or spilled liquids adhere to oven walls, wipe
with a damp cloth. Mild detergent may be used if the
oven gets very dirty.
The use of harsh detergent or abrasives is not
recommended.
The outside oven surface should be cleaned with
soap and water, rinsed and dried with a soft cloth. To
prevent damage to the operating parts inside the
oven, water should not be allowed t
CARE AND CLEANING
Although your oven is provided with safety features, it is important to observe the following:
1. It is important not to defeat or tamper with safety
interlocks.
2. Do not place any object between the oven front face
and the door or allow residue to accumulate on
sealing surfaces. Wipe the sealing area frequently
with a mild detergent, rinse and dry. Never use
abrasive powders or pads.
3. When opened, the door must not be subjected to