Sharp R-9320 Service Manual
Text of Sharp R-9320 Service Manual
in the interests of user-safety the set shouid be restored to its originai
condition
and only parts identical to those specified be used.
/
TABLE
OF CONTENTS
\
page
FOREWORD
.......................................................................
..t
CAUTION,
MICROWAVE
RADIATION.
.....................................................
.l
THUMB
INDEX ........................................
Sharp R-9320 This Manual has been prepared to provide Sharp Service
Personnel with complete Operation
and Service Informa-
tion for the Sharp Microwave Ovens, R-9320/ R-9450.
It is recommended
that service personnei carefully
study
the entire text of this Manual so they will be qualified
to
render satisfactory
customer service.
CAUTION
MICROWAVE
RADIATION
Personnel
should
not
be exposed
to the
microwave
energy which may radia
a high moisture
content,
like most foods,
produce
heat
in
the
food
to
be
cooked.
Unlike
will
absorb microwave
energy.
As the microwave
energy
conventional
ovens
microwave
energy
will
cook
foods
at a frequency
of 2450 Megahertz
enters the food,
the
without
applying
external
heat.
molecules
align themselves
with
the energy.
Because the
microw
-.- _____ - --- _-- ~~~ -.
OPERATION OF AUTO-TOUCHTM CONTROL PANEL
___-----
-. -_
.___ _ ---_.____
_~---_---~
-. - -
This
new Auto-Touch
microwave oven uses a microprocessor,
the electronic
brain that provides the
wide variety
of cooking
programs which
could
not be achieved by conventional
control
methods.
The operation
of the oven is controlled
by touching
the appropriate
pads arranged on the surface of
the
start, ,,,k a”d kg.
lndrcator lrghts for variable cooking, temp, sensor temp, compu
’ i-
,/
f-
I ’
I3
/
:
!
!
’
~
’
!I
i
! /
COYU
YED LOW YE0
H&W
;;g:
/g/jBjy/fyj-
LIGHTED
DIGITAL
DISPLAY
Shows readout of cooking time, temperature, sensor temp setting,
COOK
AUTO
rr
compu defrost operation or time of day.
~__~_
-,
OMPU
DEFROST
PADS
Touch to select compu defrost settings.
S
as a clock to keep the time of day. To set the clock, follow this procedure. When
oven is plugged in, the display
will show [ss:83]
and variable cooking
indicators,
flashing each
second.
Touch
the
CLEAR
pad; i::li-;‘z!
will appear.
After
one minute
the display will show
y---my
.
* Suppose you want to enter the correct time of day 12:30 (A.M. or P.M.)
Procedure
/
Pad Order
Display
1
1. Touch the AUTO
START/CLOCK
pad.
To Cook at HIGH
Many foods are cooked at HIGH
(100%) for best results. The variabie
cooking
control
allows you to
select the rate of microwave cooking, but the oven will automatically
operate at HIGH
if no variable
cooking control
pad is touched.
If you wish to cook at HIGH,
it is not necessary to touch the HIGH
pad. For other variable cooking control levels, the desired setting must be entered.
+ Suppose you want to heat 2 cups of
oven can be programmed
for up to 3 automatic
cooking
sequences, switching
from one
variable power setting to another automatically.
Check the microwave
recipe section of your Sharp Carousel Microwave
Cookbook
for ideas on
when to use multiple sequence cooking.
+ Suppose you want to roast beef for 5 minutes at HIGH,
and continue to cook for 30 minutes at
MED
HIGH.
Procedure
Pad Order
Display
i
I
/ 1. Enter desired t
oven can be programmed for up to 3 automatic cooking sequences, switching from one variable
power setting to another
automatically.
The oven can also switch from one temperature
setting to
another automatically,
and it can maintain a specific temperature
for up to 99 minutes.
Some of the sequences you might use in cooking include, for example as below.
I
FIRST
SEQUENCE
/
SECOND
SEQUENCE
(
THIR
Cook” system allows YOU
to cook for an extra minute at HIGH by simply touching the
“INSTANT
COOK”
pad.
You can also extend cooking time in multiples
of 1 minute by repeatedly
touching the “INSTANT
COOK”
pad during a cooking program.
* Suppose you want to cook 1 minute at HIGH easily.
Procedure
Pad Order
Display
;
I I
/
1 Touch the INSTANT
COOK pad.
I
HIGH
I
I
1 INSTANT
COOK’
1
I
I
i-i
17
1
j
jCOOK
Oven has special function
keys to defrost meats faster and better.
Compu
Defrost
1 -
5 automatically
defrost minced beef, steak, whole chicken, chicken pieces and
chops.
Each key has 3 cooking stages. Select the desired Compu Defrost number and input the food
weight by using the number pads.
+ Suppose you
want to defrost 1.36 kg steak by Compu Defrost.
i
Procedure
1. Select food category for
Compu De
i 5 PI
j
*
ease put food in the oven.
/
Close the door.
Touch the START
pad.
START
’
I
1
j
i
START
will be displayed.
/ COMPU
DEFROST
COOK
The Timer begins to count
down.
When the 2nd stage finishs, an
i
audible signal WI/I sound.
UED
LOW
COMPU
-
COVER
and
EDGE
will oe
’
displayed 4 times repeatedlv.
/
I
The 3rd stage continues after the 2nd stage without
stopping.
I
i
The cooking
rime WIII count down :o zero.
Wh
/ Comou Defrost”Chart
/
Compu
Defrost
Food
Setting
Amount
Display
Procedure
Comment
a-
l
Minced
0.5
l Remove any thawed
Stand, covered ’
beef
215 kg
p--j
[ncvEj
pieces after each stage.
lo-
15 minutes.
/
Steak
0.2
‘m
-1
l Before defrosting . . .
\
I
Shield the edge and
2:0 kg
0
0
the thin portions.
After the 1 st stage . . .
Turn over and shield
the warm portions.
After the 2nd stage
Stand, covered
1 O-l 5 minutes.
. . .
If there are
Sharp R-9320 oven is equipped with a removable temperature
probe which is plugged into the receptacle in the
top centre of the oven cavity when cooking by temperature.
Directions
for correct use of the tempera-
ture probe are as follows.
To Use the SHARP
Temperature
Probe
1 Insert the pointed metal probe portion of the temperature
probe
into the food. It is easier to position the probe correctly if this
is done while the food
8. Avoid harsh treatment
of the probe. Do not drop the probe.
9. Pot holders may be needed when removing the temperature
probe.
10. Do not remove the probe from the receptacle or from the food by pulling
on the cord. Use the
insulated handles.
11. Do not try to force the temperature
probe into solidly frozen food.
12. Temperature
readings are given for some recipes which should be cooked covered. If you wish to
use the probe, cover the food with clear
If the temperature
probe is plugged into the receptacle in the top centre of the oven cavity and the
probe is placed in water or food, the temperature
of the water or food can be monitored
on the
readout.
Procedure
Pad Order
Display
/
1 1. Touch the TEMP pad.
I
/
I
TEMP
i Temperature
detected
by
,
temperature
probe will appear
/
/ on display.
30°C
to 112” C
/ will be displayed.
I
1
1 The
time
of day will reap-
pear
- To Cobk with Sensor Temp l- 5 -
-. - ._~-
-____
Sensor Temp
l-5
automatically
cooks roasts and poultry
to an exact internal doneness.The
turn-
over, finished
temperatures
and power
levels are already calculated.
Just select the appropriate
Sensor Temp setting and the oven does the rest.
* Suppose you want to cook Roast Beef (Med) with Sensor Temp 2.
c
I
L
1
Procedure
I
Pad Order
1. Place probe in meat. Insert plug into
/
the receptacle in the top
Sharp R-9320 j TO Cook with Sensor Temp 6 (Simmer)
’
Sensor Temp 6 is used for SIOW
cooking. Sauces, stews or meats that benefit from slow cooking can
be done very easily. Sensor Temp will bring the food quickly
up to temperature and maintain
it for
up to 4 hours.
* Suppose you want to cook Beef Stew with Sensor Temp 6 (Simmer).
i
Procedure
Pad Order
Display
I
1. Place probe in casserole.
Insert plug into the receptacle in the
top centre of the oven cav