Socket 3E Operation & User’s Manual

Text of the manual

Secure Digital Scan Card Series 3

SD Scan Card 3E with Integrated Linear CMOS Bar Code Reader for: • Pocket PC 2003 devices with SDIO slot • Palm devices with SDIO slot User’s Guide

Document # 6410-00206 D

Copyright Notice Copyright © 2005 Socket Communications, Inc. All rights reserved. Socket, the Socket logo and Battery Friendly are registered trademarks of Socket Communications, Inc. SD Scan Card and SocketScan are trademarks of Socket Communications, Inc. All other brand and product names are trademarks of their respective

Table of Contents

Copyright Notice 2 1 | INTRODUCTION 5 Overview 5 About the Software 5 System Requirements 5 Package Contents 6 Product Registration 6 2 | SETUP FOR POCKET PC 2003 7 STEP 1: Uninstall Other Scanning Software 8 STEP 2: Install the Software 9 STEP 3: Insert the Card 11 STEP 4: Assign a Trigger Button 12 STEP 5: Scan Data into Your Application

1 | Introduction

Overview The Socket SD Scan Card (SDSC) 3E gives you the freedom of scanning bar codes anytime anywhere into your Pocket PC 2003 or Palm device using the smallest and most lightweight form factor available for an expansion card. In a small size totaling less than 23 grams, the card features state-of-the-art linear CMOS technology. The world

Socket SD Scan Card 3E

• Installation CD containing software and user documentation • Booklets containing warranty and copyright information Product Registration Socket highly recommends that all users register their Socket products. Registered users receive priority for technical support. Register your Socket product online at www.s

2 | Setup for Pocket PC 2003

This chapter explains how to install and use the Socket SD Scan Card 3E with a Pocket PC running Windows Mobile 2003 or Windows Mobile 2003 Second Edition. The SocketScan software supports both portrait and landscape mode for Windows Mobile 2003 Second Edition. Setup Summary STEP 1: Uninstall other scanning software. STEP 2: Inst

STEP 1: Uninstall Other Scanning Software

Delete any bar code scanning software you may already have installed on your Pocket PC. You can uninstall either directly from your Pocket PC, or indirectly via ActiveSync. OPTION 1: Uninstall Directly from the Pocket PC 1. Make sure the bar code scanning software is closed, and remove the ISC from your Pocket PC. 2.

STEP 2: Install the Software

1. Make an active connection between your Pocket PC and a host PC. Use ActiveSync and a serial/USB/Ethernet connection cable or cradle. 2. Insert the installation CD into your host PC. 3. Use My Computer or Windows Explorer to access your CD-ROM drive. In the CD, click on SETUP.EXE. 4. Follow the instructions on your screen to in

5. In the File Download screen, click Run.

6. If the Security Warning screen appears, click Run. 7. The InstallShield Wizard for SocketScan Software will begin. Follow the screens that appear to install the software. 8. When software installation is complete, disconnect the Pocket PC from the host PC. Soft reset the Pocket PC by pressing the reset button. No

Other Scanner Manuals