Philips SHB6110 Operation & User’s Manual

1 Important 3 1.1 Hearing safety 3 1.2 Electric-, Magnetic- and Electromagnetic Fields (“EMF”) 3 1.3 General maintenance 4 1.4 Disposal of your old product 4 1.5 Remove the integrated battery 4 1.6 Notice for the European Union 5 1.7 Trademarks 5 2 in the box 6 3 What else need 6 4 What you can do with your headset 6 5 Ov ...

the headphones at high volume and set the volume to a safe level. The louder the volume the shorter is the safe listening time. Be sure to observe the following guidelines when using your headphones. • Listen at reasonable volumes for reasonable periods of tim ...

• Do not expose the headset to excessive heat. • Do not drop your headset. • Do not allow your headset to be submerged in water. • Do not use any cleaning agents containing alcohol, ammonia, benzene, or abrasives. If cleaning is required use a soft cloth, if necessary dampened with a minim ...

Hereby, Philips Consumer Lifestyle, BG P&A, declares that this Philips Bluetooth headset SHB6110 is in compliance with the essential requirements and other relevant provisions of Directive 1999/5/EC. Check the root folder of your user manual CD or an addendum sheet for the Declaration of Conformity. 1.7 Trademarks ...

A mobile phone that is capable of Bluetooth stereo streaming, i.e. that is compatible with the Bluetooth A2DP profile. Other devices (Notebooks, PDA’s, Bluetooth adapters, MP3 players etc.) are also compatible if they share the Bluetooth profiles supported by the headset. These profiles are: For wireless handsfree communicati ...

VOL – VOL + Microphone Charging socket LED indicator light OptiFit ear loop adjustment ...

6.1 Charge your headset Before you use your headset for the first time, charge the battery for 6 hours for optimum battery capacity and lifetime.  Warning Use only the original charger (5V, 500mA). Using another charger may damage or destroy your headset. Plug the charger into the power outlet and connect the charger cable to the headset ...

phone Make sure the headset is charged, your mobile phone is turned on and its Bluetooth feature is enabled. Check your phones user guide to learn how to turn on Bluetooth on your phone. With the headset turned off, press until the LED starts blinking red and blue alternately. The headset will remain in “pair ...

Turn on the headset by pressing until the LED lights up. Once turned on the headset will re- connect automatically to the last device it was connected with. If the last connected device is not available the headset tries to reconnect to the penultimate device that was connected to ...