Teledyne 2010A Operating Instructions Manual
Text of Teledyne 2010A Operating Instructions Manual
Teledyne Analytical Instruments
Thermal Conductivity Analyzer
OPERATING INSTRUCTIONS FOR
Model 2010A
Thermal Conductivity Analyzer
HIGHLY TOXIC AND OR FLAMMABLE LIQUIDS OR GASES MAY BE PRESENT IN THIS MONITORING
SYSTEM.
PERSONAL PROTECTIVE EQUIPMENT MAY BE REQUIRED WHEN SERVICING THIS SYSTEM.
HAZARDOUS VOLTAGES EXIST ON CERTAIN COMPONENTS INTERNALLY WHICH MAY PERSIST FOR
A TIME EVEN AFTER THE POWER IS TURNED OFF AND DISCONNECTED.
ONLY AUTHORIZED PERSONNE
Teledyne Analytical Instruments ii
Model 2010A
Copyright © 1998 Teledyne Analytical Instruments
All Rights Reserved. No part of this manual may be reproduced, transmitted, tran-
scribed, stored in a retrieval system, or translated into any other language or computer lan-
guage in whole or in part, in any form or by any means, whether it be electronic, mechani-
cal, magnetic, optical, manual, or otherwise, without the prior written consent of Teledyne
Anal
Teledyne Analytical Instruments Thermal Conductivity Analyzer
Table of Contents
Specific Model Information...................................iv
Part I: Control Unit, Model 2010A........... Part I: 1-1
Part II: Analysis Unit, Model 2010A....... Part II: 1-1
Appendix............................................................A-1
Teledyne Analytical Instruments iv
Model 2010A
Specific Model Information
The instrument for which this manual was supplied may incorporate one or more
options not supplied in the standard instrument. Commonly available options are listed be-
low, with check boxes. Any that are incorporated in the instrument for which this manual
is supplied are indicated by a check mark in the box.
Instrument Serial Number: _______________________
Optio
Teledyne Analytical Instruments Thermal Conductivity Analyzer
Table of Contents
1 Introduction
1.1 Overview..........................................................................1-1
1.2 Typical Applications..........................................................1-2
1.3 Main Features of the Analyzer......................................... 1-2
1.4 Model Designations.........................................................1-3
1.5 Operator Interf
Teledyne Analytical Instruments vi
Model 2010A
4.3.1 Setting the Display ..................................................4-5
4.3.2 Setting up an Auto-Cal..............................................4-5
4.3.3 Password Protection.................................................4-6
4.3.3.1 Entering the Password..................................... 4-7
4.3.3.2 Installing or Changing the Password............... 4-7
4.3.4 Logging Out..............
Teledyne Analytical Instruments Thermal Conductivity Analyzer
5.7 Phone Numbers...............................................................5-5
Appendix
A-1 Specifications...................................................................A-1
A-2 Recommended 2-Year Spare Parts List........................... A-3
A-3 Drawing List.....................................................................A-4
A-4 TG Option Calibration.....................
Teledyne Analytical Instruments viii
Model 2010A
COMBUSTIBLE GAS USAGE WARNING
DANGER
The customer should ensure that the principles of operating of
this equipment are well understood by the user. Misuse of this
product in any manner, tampering with its components, or un-
authorized substitution of any component may adversely affect
the safety of this instrument.
Since the use of this instrument is beyond the control of Tele-
dyne, no responsibility by Te
Part I 1-
Teledyne Analytical Instruments
Thermal Conductivity Analyzer
Part I: Control Unit
Introduction
1.1
Overview
The Model 2010 is a family of split configuration conductivity analyz-
ers. Each analyzer consist of a Control Unit suitable for installation in a
general purpose area, and a Analysis Unit which is housed in an explosion-
proof enclosure. The Analysis Unit enclosure is rated for NEMA 4/7 Class
I, Div. 1, Groups B,C,D and is approved
Teledyne Analytical Instruments 1-2 Part
1 Introduction
Model 2010A
1.2
Typical Applications
A few typical applications of the Model 2010A are:
•
Power generation
•
Air liquefaction
•
Chemical reaction monitoring
•
Steel manufacturing and heat treating
•
Petrochemical process control
•
Quality assurance
•
Refrigeration and storage
•
Gas proportioning control.
1.3
Main Features of the Analyzer
The main features of the Model 2010A Therma