Oregon Scientific WRB603 Operation & User’s Manual

Product Overview ................................................ 4 Weather Station WRB603 – Front View ............... 4 Weather Station WRB603 – Back View ................ 4 Weather Station WRB603 – LCD ........................ 5 Remote Sensor RTGR328NA – Front ...

Reception Test ........................................................... 20 Reception Problems And Solutions ....................... 20 Many Things Attect Reception! ........................... 20 Radio WR602 – Home / Travel Feature ................. 20 Radio WR602 – Interpreting NOAA A ...

Public Alert Radio with Weather Station (WRB603/ WR602). This radio (WR602) operates on the same radio frequencies used by the National Weather Radio (NWR) and can send you NOAA alert messages to warn you about weather and other environmental dangers. This lightweight, splashproof rad ...

1. SNOOZE / LIGHT button 2. / : Increase or decrease setting; activate or deactivate RF clock 3. CHANNEL: Switch between remote sensors 4. MODE: Change display / settings 5. MEMORY: View current max. / min. temperature and humidity readings 6. : Display alarm time; e ...

1. Weather display 2. Alarm 1 3. Alarm 2 4. Atomic clock signal status 5. Time / alarm time / calendar 6. Low battery icon for remote sensor 7. Channel no. / reception status 8. Outdoor temperature 9. Outdoor humidity 10. Indoor area icon 11. Indoor temperature 12. Indoor humidity RE ...

1. LCD 2. TR / HM: Press and hold to select travel or home mode 3. EXIT: Press to exit any display or setting (clock is default setting) 4. / : Increase / decrease settings; increase / decrease volume; enable / disable alarm 1 or 2; scroll up or down to select county code 5 ...

1. Antenna 2. Neck strap: Insertion point for neck strap 3. : Press to activate 8-minute snooze and / or backlight for 5 seconds 4. : Press and hold to turn power ON / OFF; press to switch between NOAA ON / Standby / Mute / OFF modes 5. External speaker jack 6. RESET hole 7. Battery ...

if you want to use the recharging cradle. However, the radio can use 3 x UM-3 (AA) 1.5V batteries. Insert the rechargeable battery by putting the piece at the end of the wire into the indentation at the bottom right of the battery compartment: REMOTE SENSOR 2 x ...

Insert the adapter into the weather station to turn it on and allow charging for the radio. REMOTE SENSOR (RTGR328NA) This remote temperature-humidity sensor can receive and transmit atomic clock signals, collect outdoor temperature and humidity readings, and then relay them back to the weather station. It can be used with up to 4 other ...

station, minimizing obstructions such as doors, walls, and furniture. • Place the sensor in a location with a clear view to the sky, away from metallic or electronicobjects. • Position the sensor close to the weather station during cold winter months as bel ...