Precor C932 Owner's Manual
Text of Precor C932 Owner's Manual
IMPORTANT SAFETY INSTRUCTIONS
IMPORTANT SAFETY INSTRUCTIONS
When using an electrical appliance, basic precautions should always be taken, including the
following:
•
To ensure your safety and to protect the unit, read all the instructions before as-
sembling and using the treadmill.
•
To ensure the proper use and safety of the treadmill, make sure that all users read
this manual. Please make thi
IMPORTANT SAFETY INSTRUCTIONS SAVE THESE INSTRUCTIONS
•
Never step off the treadmill while the running belt is moving. Keep your body and
head facing forward. Never attempt to turn around on the treadmill.
•
Never turn ON the treadmill when someone is standing on the machine.
•
Never block the air openings on the hood while operating the treadmill. Keep the
air openings clean and free of lint
Important Safety Instructions .........................................2
Safety Approval...................................................................... 3
Grounding Instructions........................................................... 3
Radio Frequency Interference (RFI)....................................... 6
European Applications ..........................................................
Precor C932 Table of Contents
The C932 Keypad ...........................................................30
Keypad Tips ........................................................................... 30
Special Keypad Functions at the Precor Banner .................... 30
Keys on the Keypad ............................................................... 32
Changing the Display Features Using the SELECT Key .......
RADIO FREQUENCY INTERFERENCE (RFI)
Federal Communications Commission Part 15
The treadmill has been tested and found to comply with:
•
The IEC EMC Directive (international electromagnetic compatibility certification)
•
The limits for a Class A digital device, pursuant to Part 15 of the FCC Rules.
These limits are designed to provide reasonable protection against harmful
interference in a commer
Do not attempt to service the treadmill yourself except for the maintenance tasks
described in this manual. The treadmill does not contain any user-serviceable
parts. For information about product operation or service, visit the Precor Web
Site at www.precor.com or contact an authorized Precor Commercial Products
Customer Support Representative at 1-888-665-4404.
To help customer
Precor C932 Unpacking the Treadmill
Thank you for purchasing the Precor C932 treadmill. Built to the exacting stan-
dards of the health club environment, the treadmill is intended for commercial
use and can withstand the rigors of daily club use with little maintenance.
Important: Before using the treadmill, we urge you to familiarize yourself and
your staff with the entire Owner’s Manual. Understanding this
Diagram 2 Hardware kit.
A
C
D
B
E
F
G
Carefully unpack the pieces of the treadmill and lay them on the floor near
the location where you plan to use the treadmill.
HARDWARE KIT
After unpacking the treadmill, open the hardware kit (refer to Diagram 2) and
make sure that you have the following items:
❑
(A) four 2-inch long socket head screws — mount upright supports to base
❑
(B) four barrel sp
You do not need any special knowledge or experience to set up the treadmill.
However, you will need assistance during assembly.
INSTALLATION REQUIREMENTS
Follow these installation requirements when installing the treadmill. If you do not
install the treadmill according to the following guidelines, you could void the Precor
limited warranty.
•
Set up the treadmill on a solid, flat surface. Unpac
CAUTION: Do not lift the rear end of the treadmill by grasping the rear
roller or the end cap. The running belt can move and the end caps can
break off which may cause injury to you or to the unit.
3.
Move the treadmill. Diagram 3. To avoid injury to yourself or damage to the unit,
ask for help in placing the treadmill where you plan to use it. Diagram 3 illustrates
how to properly lift the rear
CAUTION: To avoid damage to the display cable, read and follow these
steps carefully. Damage to the cable due to improper assembly is not
covered by the Precor limited warranty.
6.
Route the display cable. Diagram 5. Unwrap the cable and remove any
kinks. Have an assistant hold the right upright support close to the base
while you route the cable through it.
Note: Attaching a string to the cable w
a. Place a washer (D) onto each of two ¾-inch screws (C). Thread the screws
through the front panel and into the upright support. See Diagram 6, #2.
Do not fully tighten the screws. Leave room for final adjustments.
CAUTION: Avoid pinching the cable with the bolts and spacers.
b. Place a washer (D) and barrel spacer (B) on each of two 2-inch screws
(A). Insert the screws through the upright supp
10. Connect the display cable and secure the display console. Refer to
Diagram 8, #1 and take the following steps to secure the display cable and
console.
a. Attach the cable connector by sliding it into its receptacle underneath the
console. A definite “click” is heard when the cable is properly attached.
Refer to Diagram 8, #2. If you do not hear and feel the connector “snap”
into place,
11. Install the center handrail. Loosen the four fasteners in the handrail clamp
bracket with the hex key provided. See Diagram 9, #1. The center handrail is
packaged in two pieces. Install one side at a time by following these steps:
a. Insert a handrail end cap. See Diagram 9, #2.
b. Slide the end of the handrail into the center clamp and rotate the handrail
so that it falls inside the end cap.
12. Install fasteners in the handrail clamp. Diagram 11. Return to the center
handrail clamp and place a large washer (F) onto each of two screws (E).
Thread the screws through the handrail clamp. Finger tighten.
CAUTION: Do not overtighten the screws or you may inadvertently
cause stress cracks.
Diagram 12 Secure the fasteners.
First: Alternately
tighten four front
panel screws.
Third: Alternatel
Precor C932 Diagram 13 Tighten the handrail
fasteners.
1
2
Center handrail
clamp screws (2)
Handrail end cap
Center console
bracket screws (4)
Diagram 14
2
1
Level the unit.
3
14. Tighten all the center handrail fasteners. Diagram 13. Start with tightening
the two end cap screws and work inward. See Diagram 13, #1. So that you
don’t overtighten the fasteners, hold the supplied hex key by its 3-inch sectio
Precor C932 17. Plug the power cord into an appropriate power outlet. Refer to Ground-
ing Instructions on page 3. Make sure that the ON/OFF (I/O) power switch,
located on the front panel of the treadmill, is placed in the OFF (O) position.
CAUTION: The treadmill requires a dedicated, grounded circuit.
A 20 amp circuit is recommended. Make sure that no other product or
machine uses the same circuit as the tre
CHECKING THE ALIGNMENT OF THE RUNNING BELT
The belt is aligned at the factory before shipment. However, during shipment or by
using the treadmill on an uneven surface, the belt might move off center. Proper
belt alignment is important because it allows the belt to remain centered and
assures smooth operation.
Follow these steps to check the alignment:
CAUTION: Do not walk on the running belt durin