Primare 122 Operation & User’s Manual
Text of Primare 122 Operation & User’s Manual
I 2 2 U S E R G U I D E
Welcome!
Welcome to the Primare I22! Your I22 is a high-quality integrated amplifier,
designed as the ideal centrepiece of a home hi-fi system.
Not
active
RS232
Record Preamp
IR in/out
Speaker (R)
Speaker (L)
Power
On/off
Trigger
out
TOSlink
SPDIF
USB
Analogue inputs
Optional DAC board
Digital inputs
Analogue outputs
I 2 2 U S E R G U I D E (
1 U n p a c k t h e I 2 2
Your I22 is supplied with the following
components:
• Mains cable.
• IR cable.
• Trigger cable.
• C23 remote control.
• Two batteries for the remote control.
If any of these items are missing please contact
your supplier. We recommend you retain the
packaging in case you need to transport the unit
at a later date.
2 C o n n e c t s p e a k e r s
The I22 is designed to be connected di
I 2 2 U S E R G U I D E
Using the I22
This page explains how to operate your I22, using the functions available from the
front panel or C23 remote control.
F r o n t p a n e l
c o n t r o l s
Standby O
Switches the I22 to standby, or switches it on from
standby.
SELECTOR
Selects the previous or next input.
Hold down the lower SELECTOR button to
change the balance.
VOLUME
Changes the volume.
S e l e c t i n g a s o u r c e
The I22 provides a choice
I 2 2 U S E R G U I D E *
Using the remote control
F i t t i n g t h e b a t t e r i e s
Before using the remote control you need to insert
the two button cells supplied with the C24.
• Open the cover on the back of the remote
control by pressing the tab gently:
• Insert the two batteries, positive side uppermost:
+
CR2025
LITHIUM BATTERY
3V
+
CR2025
LITHIUM BATTERY
3V
• Replace the cover and push until it clips into place.
Note: Replace o
I 2 2 U S E R G U I D E +
Configuring the I22
The I22 allows you to rename the inputs and change the offset and balance of each
input to suit the sources in your system.
R e n a m i n g a N I N P U T
You can give any input a name of your choice of
up to six characters.
To rename an input
• Select the input you want to rename.
• Press and hold down both SELECTOR
buttons for three seconds until the first
character starts flashing.
01 23
• S
I 2 2 U S E R G U I D E ,
General settings
The I22 General Settings menu allows you to configure general aspects of the I22’s operation.
U S I N G t h e g e n e r a l
s e t t i n g s m e n u
To display the General Settings menu from
the front panel
• Press and hold down the O button until the
display shows the version number:
V1-00
• Keeping the the O button held down press
the lower SELECTOR button.
The first settings option is shown:
IR FR
I 2 2 U S E R G U I D E -
F e a t u r e s
Ultra Fast Power Device (UFPD) Class-D
Amplifier
26dB constant loop gain in the entire audio range
Power Factor Control (PFC) power supply
S p e a k e r O u t p u t s
Power
2 x 80W into 8Ω, 2 x 160W into 4Ω
A n a l o g u e o u t p u t s
Preamplifier output
RCA, 94Ω impedance.
Record output
RCA, 94Ω impedance.
I n p u t s
4 x RCA, 15kΩ impedance.
O p t i o n a l d a c b o a r d
1x Digital Optical input (T
I 2 2 U S E R G U I D E .
CAUTION: To reduce the risk of electrical shock
do not remove cover (or back). No user serviceable
parts inside. Refer servicing to qualified service
personnel.
WARNING: To reduce the risk of fire or electrical
shock, do not expose this apparatus to rain or
moisture.
CAUTION: In Canada and the USA, to prevent
electric shock, match the wide blade of the plug to
the wide slot in the socket and insert the plug fully
into the socket
p l e a s e v i s i t p r i m a r e . n e t f o r m o r e
i n f o r m a t i o n a b o u t o u r p r o d u c t s
t h e s o u n d a n d v i s i o n o f s c a n d i n a v i a
primare ab limstensgatan 7 21616 limhamn sweden primare.net