FingerTec H2i Operation & User’s Manual

Time Attendance System User Guide H2i s u p p o r t @ f i n g e r t e c . c o m H2i ...

Viewing the User Guide in the Internet Included Accessories Included Printed Materials Activating H2i Registering H2i 5-7 CHAPTER 2 • BASICS Introduction to H2i H2i Overview Security Features Restarting and Resetting H2i 8-18 CHAPTER 3 • CONNECTION – SYNCING Installation Mount on Well Communication Descri ...

*for H2i RFID Screwdriver USB Extension A Packet of Bolts MIFARE Card (1 pieces) *for H2i MIFARE Door Accessories Cable RS485 Wiegand Output Cable Power Supply Cable H2i s u p p o r t @ f i n g e r t e c . c o m Num Lock Home PgUp PgDn Del Enter Ins End Back space 7 / - + 4 1 0 8 5 2 9 6 3 . Diod Back Plate (Thi ...

• FingerTec Comprehensive DVD • Quick Start Guide • Pamphlet • User Enrollment Template Form • Warranty Card Activating H2i Connect all the cables correctly at their specific points and turn on the power sup- ply. The H2i terminal does not have an on/off button. Registering H2i Make sure that you register yo ...

Reset button H2i s u p p o r t @ f i n g e r t e c . c o m Reset Fingerprint Scanner Speaker Front of Terminal Bottom of Terminal 2 • BASICS Introduction to H2i FingerTec H2i is a simple master terminal, functioning as a time attendance and door access device and it can be used as a time attendance recorder a ...

Connect the external USB keypad to the bottom (USB port) of the H2i to insert a specific user ID number during enrollment or deletion. You can also use the key- pad to input commands to reset settings of the H2i back to its default fa ...

ADMINISTRATOR CARD To reset the H2i back to its default factory settings, you must first have the admin- istrator card with you. Green LED light blinks > Wave Administrator card 5 times at the induction area > “Restore to default settings. Please wave your administrator card to confirm” > Wave t ...

(recommended) H2i s u p p o r t @ f i n g e r t e c . c o m 3 • CONNECTION – SYNCING TERMINALS Installations FingerTec terminals offer several connections for power and communications. In- stallations of FingerTec time attendance terminals are simple than installation for door access functions. Mount On Wall Att ...

For NC or NO door lock system GND BUT SEN NO COM NC ACCESS CONNECTION PORT - TCP/IP DC12V Power Supply +12V GND POWER SUPPLYPORT RS485 CONNECTION PORT 1. RS485 Single Connection 2. RS485 Network Connection +12V IWD1 IWD0 RLED GLED BEEP GND WIEGAND INPUT CONNECTION PORT 3rd party controller with 26 bits wiegand output WD0 WD1 WIE ...

Release button Door sensor + - 2 3 A C EM lock (NC) Emergency break glass (NC) Key switch (NC) NOTE Please refer to AdapTec AC Installer Manual if you are using AdapTec AC. DC12V Power Supply +12V GND POWER SUPPLY PORT 485- 485+ GND BUT SEN NO COM NC AL- AL+ ACCESS CONNECTION PORT R ...