Siemens SINAMICS S120 Configuration Manual

characteristics 7 Dimension drawings 8 Gearbox 9 Appendix A SINAMICS S120 Synchronous Motors 1FK7 Configuration Manual (PFK7S), Edition 12.2006 6SN1197-0AD16-0BP1 ...

damage to property. The notices referring to your personal safety are highlighted in the manual by a safety alert symbol, notices referring only to property damage have no safety alert symbol. These notices shown below are graded ...

Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1 5 Foreword Information on the documentation You will find an overview of the documentation, which is updated on a monthly basis, in the available languages on the Internet under: http://www.siemens.com/motioncontrol Select the menu items "Support" → "Technical Docume ...

6 Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1 Technical Support If you have any technical questions, please contact our hotline: Europe / Africa Asia / Australia America Phone +49 (0) 180 5050 – 222 +86 1064 719 990 +1 423 262 2522 Fax +49 (0) 180 5050 – 223 +86 1064 747 474 +1 423 262 2289 Internet ...

Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1 7 Disposal Motors must be disposed of carefully taking into account domestic and local regulations in the normal recycling process or by returning to the manufacturer. The following must be taken into account when disposing of the motor: • Oil according to t ...

8 Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1 Warning The successful and safe operation of this equipment and motors is dependent on professional transport, storage, installation and mounting as well as careful operator control, service and maintenance. For special versions of the drive units and motors ...

Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1 9 Note Under field conditions and in dry service areas, SINAMICS units with motors conform to Low-Voltage Directive 73/23/EEC. In configurations specified in the associated EC Declaration of Conformity, SINAMICS units with motors conform to the EMC Directive 8 ...

10 Configuration Manual, (PFK7S), Edition 12.2006, 6SN1197-0AD16-0BP1 Information regarding non-Siemens products Notice This document contains recommendations relating to non-Siemens products. Non-Siemens products whose fundamental suitability is familiar to us. It goes without saying that equivalent products from other manuf ...