SICK FLOWSIC500 Operating Instructions Manual

Text of SICK FLOWSIC500 Operating Instructions Manual

SICK FLOWSIC500 O PERATING INSTRU CTIO NS

Installation Operation Maintenance Title Page FLOWSIC500 Ultrasonic Gas Flow Meter with Optional Volume Conversion

SICK FLOWSIC500 FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH

Document Information Described Product Product name: FLOWSIC500 Document ID Title: Operating Instructions FLOWSIC500 Part No.: 8015391 Document ID: 9186957 Version: 2-3 Release: 2016-10 Manufacturer SICK Engineering GmbH Bergener Ring 27 · D-01458 Ottendorf-Okrilla · Germany Phone: +49 35205 52410 Fax: +49 35205 52450 E-Mail: [email protected] Original Documents
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 3 Warning Symbols Warning Levels / Signal Words DANGER Risk or hazardous situation which will result in severe personal injury or death. WARNING Risk or hazardous situation which could result in severe personal injury or death. CAUTION Hazard or unsafe practice which could result in personal injury or property damage. NOTICE Hazards which could result in property
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 1 Important Information . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 9 1.1 Main hazards . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 10 1.2 About this document . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 5 3.4 Electrical installation . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 37 3.4.1 Requirements for use in potentially explosive atmospheres . . . . . . . . . . . . . . . . . . . 37 3.4.2 Criteria for electrical connection . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 6 Clearing Malfunctions . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 77 6.1 Contacting Customer Service . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . 78 6.2 Status messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 7 9 Annex . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .107 9.1 Conformities and Technical Data . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .108 9.1.1 CE certificate . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 9 Subject to change without notice FLOWSIC500 1 Important Information Main hazards About this document Intended use Responsibility of user
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH Important Information Subject to change without notice 1.1 Main hazards 1.2 About this document This Manual describes: – Device components – Installation – Operation of the FLOWSIC500. It contains the main safety information for safe operation of the FLOWSIC500. Scope of document Make sure that your FLOWSIC500 is equipped with optically isolated inputs an
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 11 Subject to change without notice 1.3 Intended use 1.3.1 Purpose of the device The FLOWSIC500 serves for measuring the gas volume, volume flow rate and gas velocity of natural gas in pipelines. The FLOWSIC500 with optional volume conversion serves for measuring the gas volume and converting the gas volume measured to base conditions as well
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH Important Information Subject to change without notice 1.3.3 Operation in potentially explosive atmospheres 1.3.4 Combustible gas ▸ The FLOWSIC500 is suitable for measuring combustible and occasionally ignitable gases corresponding to zones 1 and 2. 1.3.5 Restrictions of use ▸ Refer to the type plate for the configuration of your FLOWSIC500. ▸ Check the F
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 13 Subject to change without notice 1.3.6 Cleaning 1.4 Responsibility of user ▸ Only put the FLOWSIC500 into operation after reading the Operating Instructions. ▸ Observe all safety information. ▸ If anything is not clear: Please contact the SICK Customer Service. Designated users The FLOWSIC500 may only be operated by skilled technicia
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH Important Information Subject to change without notice Danger identification on device Special local conditions ▸ Follow all local laws, regulations and company-internal operating directives applicable at the installation location. Retention of documents These Operating Instructions must be ▸ Kept available for reference ▸ Passed on to new owners. 1.5 Add
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 15 Subject to change without notice FLOWSIC500 2 Product Description Operating principle Device components Meter sizes Power supply Interfaces Device option: Volume conversion Totalizers Logbooks and Archives Parameter protection Sealing
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH Product Description Subject to change without notice 2.1 Operating principle 2.1.1 Gas flow meter The FLOWSIC500 works according to the principle of ultrasonic transit time difference measurement. Fig. 3 Functional principle Measured signal transit times tAB and tBA are defined by the current sound and gas veloc- ity. Gas velocity v is determined from the diffe
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 17 Subject to change without notice 2.2 FLOWSIC500 measuring system The FLOWSIC500 measuring system comprises: ● FLOWSIC500 gas flow meter, ● Adapter for installation in pipeline and ● optional p&T sensors for the volume conversion device option. Fig. 4 FLOWSIC500 components 2.2.1 Adapter The adapter is available in various flange standar
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH Product Description Subject to change without notice 2.2.2 Gas flow meter An internal flow conditioner rectifies the gas flow in the gas flow meter so that flow profile disturbances caused by pipe bends in the inlet or outlet sections or components projecting into the pipe (e.g., a thermowell) have no influence on measuring results. The gas flow meter can be re
FLOWSIC500 · Operating Instructions · 8015391/Z261/V2-3/2016-10 · © SICK Engineering GmbH 19 Subject to change without notice 2.5.1 Pulse and status outputs FLOWSIC500 has 4 digital switching outputs. Digital switching outputs DO_0, DO_2 and DO_3 are electrically isolated according to EN 60947-5-6. Alternatively, digital switching outputs DO_2 and DO_3 can also be configured as Open Col- lector. When used as pulse output, maximum 2

SICK Measuring Instruments Owners Instructions: