Novus TagTemp Stick Instruction Manual

1 INTRODUCTION TagTemp Stick is an electronic temperature recorder. A sensor measures the temperature and the read value is stored in memory. This data can later be downloaded to a computer for display and analysis in the form of tables or charts. The LogChart II software e ...

4.1 INSTALLING LOGCHART II The LogChart II, application is used to configure the parameters for data transfer. To install the LogChart II, run the file LC_II_Setup.exe available on our web site. 4.2 RUNNING LOGCHART II When you open LogChart II the main window is displayed. Fig. 01 – LogChart II mai ...

measurement: Fig. 05 – Configuration window Unit: Defines the unit of the value measured: ºC or ºF for channel 1 (temperature). Value: It defines how the value measured will be registered. Options are: • Instantaneous: The value logged will be exactly the v ...

5.2.2 Measures Table Window To display measurements in a tabular form, press the icon Table View: Values are presented in a tabular form, listing the measurement time and value. Fig. 07 – Screenshot showing the measurement table 5.2.3 General information table This window shows some information about the equipmen ...

The LED is not flashing: The LED flashing light is intentionally weak, and it can be difficult to see it in clear environments, certify it is really not flashing. Communication with the equipment fails: Make sure the COM port is selected correctly and there is no other program using the same ...