Clear-Com RS-602 Instruction Manual

©2005 Vitec Group Communications Inc. All Rights Reserved Part Number 810288, Rev. B Vitec Group Communicatons 4065 Hollis Street Emeryville, CA 94608-3505 U.S.A Clear-Com is a registered trademark of Vitec Group Communications The Clear-Com Logo is a registered trademark of Vitec Group Communications Windows is a registered tr ...

CONTENTS INTRODUCTION. . . . . . . . . . . . . . . . . . . . . . . . . . . . 1 QUICK START. . . . . . . . . . . . . . . . . . . . . . . . . . . . . 3 OPERATING YOUR BELTPACK . . . . . . . . . . . . . . . . . . . . 5 Beltpack Compatibility . . . . . . . . . . . . . . . . . . . . . . . . . . ...

Editing a Mode’s Settings. . . . . . . . . . . . . . . . . . . . . . . . . 30 Restoring the Factory Default Settings. . . . . . . . . . . . . . . 31 Settings You Can Customize . . . . . . . . . . . . . . . . . . . . . . 32 Mode Select. . . . . . . . . . . . . . . . . . . . . . . . ...

1 INTRODUCTION Thank you for choosing this product. Clear-Com designed the 600 series of beltpacks to meet the needs of all beltpack users, from beginners to experienced professionals. For advanced users, the 600 series provides the most advanced level of functioning available. You can choose fro ...

RS-602 AND RS-622 BELTPACKS The RS-602 and RS-622 beltpacks add the following features: • Two intercom channels • Local input for program audio • “Loopable” program audio; you can connect program audio to other beltpacks in a “daisy-chain” configuration • Program audio volume contr ...

3 QUICK START To start using your beltpack immediately: 1. Connect the appropriate 6-pin XLR line cables from an active intercom line to the beltpack. Note: The beltpack’s intercom connectors use the Switchcraft-style 6-pin configuration. If ordering Neutrik 6-pin plugs to make a cable or patch panel, specify that you n ...

4 5. Adjust the sidetone and incoming volume levels for both channels as you and others on the channels speak at the anticipated levels for the application. 6. To send a call signal, press the button labeled “call” for the appropriate channel. ...

OPERATING YOUR BELTPACK BELTPACK COMPATIBILITY The RS-602 and RS-622 beltpacks work with all previous versions of standard Clear-Com party-line stations and beltpacks, as long as you use proper cabling and 6-pin connectors. These models are not designed for use on a two-wire (TW) line. If you use these beltpacks on a T ...

Some onboard programming options can change the function of this light. For more information about onboard programming, refer to the chapter “Customizing Your Beltpack.”. Figure 1: RS-602/622 Control Panel � �������������������������������� ...