Icom IC-R30 Advanced Manual

8 Bluetooth® OPERATION 7 OTHER FUNCTIONS 6 MENU SCREEN 5 GPS OPERATION 4 MEMORY OPERATION 3 RECORDING AND PLAYING BACK 2 microSD CARD 1 POWER SUPPLY INTRODUCTION ...

state of the art technology and craftsmanship. With proper care, this product should provide you with years of trouble-free operation. ■ About the IC-R30 manuals The following manuals are supplied for your IC-R30. Basic manual (Supplied with the IC-R30) Instructions for the basic operations, precautions. Advanced manual (This manual) Instructions for the advanced operations, as shown below. • Battery operation* • Using a microSD card* • Recording the received audio* • Memory operation* • GPS operation* • Menu screen* • Other ...

The following functions and features can be used with Adobe Acrobat Reader. • Keyword search Click “Find” (Ctrl+F) or “Advanced Search” (Shift+Ctrl+F) in the Edit menu to open the search screen. This is convenient when searching for a particular word or phrase in this manual. * The menu screen may differ, depending on the Adobe Acrobat Reader version. • Find screen • Advanced search screen Click to open the find or search screen or advanced search screen. INTRODUCTION ...

• Printing out the desired pages. Click “Print” in the File menu, and then select the paper size and page numbers you want to print. * The printing setup may differ, depending on the printer. Refer to your printer’s instruction manual for details. * Select "A5" size to print out the page in the original manual size. • Read Out Loud feature. The Read Out Loud feature reads aloud the text in this PDF. Refer to the Adobe Acrobat Reader Help for the details. ( This feature may not be usable, depending on your PC environment including the operating system.) * The screen may di ...

Character type Selectable characters and symbols AB A to Z, 0 to 9, (space) ab a to z, 0 to 9, (space) 12 0 to 9, (space) !”# ! " # $ % & ’ ( ) * + , - . / : ; < = > ? @ [ \ ] ^ _ ` { | } ˜ (space) Selects a character Selects a character Selects a character Clears the entry Moves the cursor to the left Opens the Entry Mode Select window Selects a character* Keaypad *Only when the DIAL/VOL Switch function is ON. Alphabet (Upper case) Alphabet (Lower case) Number Sets the entry To enter characters • To insert a text, move the cursor to a place to enter, then push the keypad. L You can elect a character by rotating [DI ...

D Usable characters The usable characters and symbols, and the maximum characters differ, depending on the item. See the following list for details. Category Item Character type Maximum characters Illegal characters Ref. Memory mode Memory name [AB] [ab] [12] [!”#] 16 – p. ?-? Bank name [AB] [ab] [12] [!”#] 16 – Program scan Scan name [AB] [ab] [12] [!”#] 16 – P-LINK Scan Link name [AB] [ab] [12] [!”#] 16 – SD Card Save Setting [AB] [ab] [12] [!”#] 20 / : ; * < > p. ?-? Export [AB] [ab] [12] [!”#] 20 / : ; * < > p. ?-? GPS Memory Memory name [AB] [ab] [12] [!”#] 16 – p. ?-? Gr ...

D How to enter Example: Entering “2m Call” as a Memory name of channel 00 in group 00. 1. Push [VFO/MR] to enter the Memory mode. 2. Push [MW]. 3. Select “Manage Memory.” (Rotate [DIAL] to select it, then push [ENTER].) 4. Select group “00.” 5. Select channel “00,” then push [QUICK]. 6. Select “Edit”. • The Edit screen is displayed. 7. Select “NAME.” • The Memory name edit screen is displayed. 8. Push [QUICK] to select a character type. 9. Push [MHz] to select “2.” L To enter symbols, select [!”#]. 10. Repeat steps 8 ~ 9 to enter a name. 11. After entering, push [ENT]. � ...

There are air ventilation holes on the receiver body and battery pack/case that adjust the air pressure inside of the receiver. L Applying a sticker over the ventilation hole blocks the air pressure adjustment, and may decrease the audio output level. L Damage to the ventilation sheet may reduce the water protection capability. Here is an air ventilation hole under the sheet. Here is an air ventilation hole. Here is an air ventilation hole. INTRODUCTION Ventilation sheet ...

D Battery life …………………………………………………… 1-2 D About the battery replacement …………………………… 1-2 D About the safety use of battery case ……………………… 1-3 ■ Charging with a USB cable ………………………………… 1-4 ...

z Remove the battery case, then install three AA (LR6) size alkaline batteries, as described below. D Battery life The approximate battery life (operating time) is approximately 4 hours under the following assumptions: • Dualwatch function: ON (A band: Receiving, B band: Stand-by, Power Save function: ON (Auto (Short)) L The battery life may differ, depending on the operating style, or the installed alkaline batteries. L The batteries may seem to have low capacity when used in low temperatures. Keep the case warm in low temperature environments. D About the battery replacement When the alkaline batteries ...

• When installing batteries, make sure they are all the same brand, type and capacity. Also, do not mix new and old batteries together. • Keep the battery terminals clean. It’s a good idea to occasionally clean them. • Never incinerate used battery cells since the internal battery gas may cause them to rupture. • Never expose a detached battery case to water. If the battery case gets wet, be sure to wipe it dry before using it. • Never use batteries whose insulated covering is damaged. CAUTION: Install only alkaline batteries into the BP-293. NOTE: • Remove the alkaline ba ...

You can charge the battery pack with the supplied USB cable (A-microB type). TIP: • When the battery pack is fully charged, the charging will automatically stop. If you leave the receiver connected to the USB cable, the charging will automatically start when the battery has been almost exhausted. Even when the receiver power is OFF, a slight current still flows in the circuits. Remove the battery pack or batteries from the receiver when not using it for a long time. Otherwise, the installed battery pack or battery case cells will become exhausted, and will need to be recharged or replaced. • You c ...

■ Saving data onto the microSD card ………………………… 2-2 ■ Loading the saved data from the microSD card …………… 2-4 ■ Backing up the data from a microSD card onto a PC ……… 2-5 D About the microSD card’s folder ………………………… 2-5 D Making a backup file on a PC……………………………… 2-6 ■ Importing or Exporting a CSV format file …………………… 2-9 D Importing ……………………………………………………2-10 D Exporting ……………………………………… ...

• Receiver data Memory channel contents, receiver settings, and so on. • Recorded audio Recorded received audio data. • Receive history Receive history log (Digital signal). • Position data from the GPS receiver Position data from the internal GPS receiver. ■ Saving data onto the microSD card Memory channels and item settings on the menu screen can be saved on a microSD card. Saving data on the microSD card enables you to easily restore the receiver to its previous configuration, even if an All reset is performed. L Data can be saved as a new file or overwritten to an older file. S ...

Saving with a different file name [MENU] > SD Card > Save Setting 1. Push [MENU]. 2. Select “Save Setting” in the “SD Card” menu. (Rotate [DIAL] to select it, then push [ENTER].) 3. Select “<>.” 4. Push [CLEAR] to delete the selected character. L Holding down [CLEAR] deletes the all characters. 5. After entering a file name, push [ENTER]. L Refer to page iv for character entry details. 6. Select “YES,” and then push [ENTER]. L Push [CLEAR] to return to the Main screen. ...

The saved memory channels, item settings on the menu screen can be copied to another IC-R30. This function is convenient when sharing data with other IC-R30s. L Saving the current data on to a microSD card is recommended before loading the data. Example: Loading setting data “Set20180216_01” [MENU] > SD Card > Load Setting 1. Push [MENU]. 2. Select “Load Setting” in the “SD Card” menu. (Rotate [DIAL] to select it, then push [ENTER].) 3. Select the desired file to be loaded, then push [ENTER]. • A confirmation dialog is displayed. 4. Select “YES,” and then push [ENTER ...

a PC A backup file restoring, even if the data on the microSD card is accidentally deleted or corrupted. D About the microSD card’s folder The folders contained in the microSD card are as follows: q IC-R30 folder The folders created in the IC-R30 are in this folder. w Csv folder Contains the GPS Memory, Memory channels, Programmable Scan Edges Import/Export folders. e GpsMemory folder Contains the GPS Memory in the “csv” format to import or export. r MemoryCh folder Contains the Memory channels in the “csv” format to import or export. t ScanEdge folder Contains the Programmab ...

D Making a backup fi le on a PC You can make a backup of the data that is stored on a microSD card, through a USB cable. Operation on the receiver [MENU] > Function > USB Connect > SD Card Mode 1. Connect the receiver to a PC using a USB cable. 2. Turn ON the receiver power. 3. Push [MENU]. 4. Select “SD Card Mode” in the “Function” menu. (Rotate [DIAL] to select it, then push [ENTER].) • A confi rmation dialog appears. 5. Select “YES.” • Displays the IC-R30 folder on the PC screen. TIP: You can also read or write the data using the microSD car ...

D Making a backup file on a PC (Continued) Operation on the PC NOTE: If the “AutoPlay” screen is not displayed as shown below, click the Folder icon on the task bar. Example: Saving the data in the folder “Backup” on drive C. 1. Put the mouse cursor on “USB Drive,” then right-click. L The screen may differ, depending on your PC environment. 2. Click [Copy]. Right-click Click 3. Right-click on the destination folder where the back up files are saved, then click [Paste]. (Example: Folder “Backup” on drive C.) • The data stored on the microSD card is saved o ...

D Making a backup file on a PC (Continued) 4. To disconnect the IC-R30 from the PC, click the “Eject Mass Storage Device.” Click Right-click 5. When “Safe To Remove Hardware” is displayed, disconnect the USB cable from the PC. ...