Sunpak S34?TSR Installation Operation & Maintenance

-Two Stage Remote- Operating, Programming, and Gas Type Conversion Instructions for Model S34 TSR These instructions are designed to be used in conjunction with Sunpak Installation, Operation & Maintenance Manual (P/N 65132). Should you have any questions regarding these instructions or need a copy of the Sunpak Manual, please contact the factory. Infrared Dynamics, Inc 3830 Prospect Avenue Yorba Linda, CA 92886 Tel: (888) 317-5255 www. Infradyne.com ...

2 Model S34 TSR Sunpak S34-TSR The Sunpak S34 heater with the TSR hand held remote control provides radiant heat with both a high and low heat setting. The Sunpak TSR is turned on and off with the wireless remote only, no wall switch is needed. Each heater comes pre-programmed with a remote control. Each heater can be programmed to recognize a total of three different wireless devices. Conversely multiple heaters can be programmed to operate off one device. Should a heater loose its programming, or if additional remote devices are to be used, see section below, “Programming Heater”. Initial Power-up of Sunpak S34-TSR Once t ...

4 Model S34 TSR Converting to Propane or Natural Gas In order to convert the heater to Propane from Natural Gas or vice versa your must change three parts, properly label the new gas type on the heater and adjust the regulator. 1. Main Burner Orifice 2. Pilot Burner Orifice 3. Adj Plug (for low setting) 4. Adjust Regulator 5. Label with new gas type Conversion of gas types with this heater should only be performed by a licensed profession who is familiar with this type of product. It is important that you follow all the steps including gas leak and operation testing. WARNING: Improper adjustment, alteration, service or maintenanc ...