Primos 63063 Operation & User’s Manual

Model#63063 Thanks for purchasing this Primos Mug Shot Trail Camera. Please read this user’s guide carefully before your use. Product overview Fig.1 ...

ON/SETUP/OF F Battery compartment DC Port PIR USB SD CARD SLOT OK button UP Down ...

12MP (2MP base sensor) Image interval Fixed 5 seconds Lens Angular Field Of View 38 degrees (+/- 2 degrees) Video 720p (1080x720) Trigger speed 0.6s PIR Sensor Yes, auto sensitivity PIR distance 60 feet IR Flash 24pcs 850nm LEDs, 70 feet flash range Video interval Fixed 5 seconds Vide ...

camera’s power OFF when loading / unloading batteries. Be sure to insert each battery so it’s polarity (+/- direction) matches the polarity indications at the bottom of the battery tray. A full set of 6 AA Alkaline batteries should be used. Note:  N ...

camera ready to use, with all options set to your preferences. While this can be done in the field (no computer or internet access is needed), most users will likely want to setup the camera at home, in advance. There are only a few setting ...

Video Clips that are 10 seconds long at 720p resolution (display shows a movie camera icon). Press OK after setting. Setting Camera ID# (if using multiple cameras) (Fig.7) Use UP/DOWN to select a reference ID# (from “01” to “99”) for this camera, which ...

mount it in place correctly and securely. There are two ways to mount the Primos Mug Shot Trail Camera: using the provided adjustable web belt, or the tripod socket. Using the adjustable web belt: Push one end of the belt through the two bracket on the back of ...

Once you move the Power Switch to ON, the AIM/Status LED will blink for several seconds (10 seconds countdown). This gives you time to close and lock the front cover of the Primos Mug Shot Trail Camera and then walk away. During this time, the AIM/Status LED will blink continuously. After it stops blinking, the PIR sensor is active, a ...