DRAKE DSE 2 PLUS Instruction Manual
Read Online
Read the DRAKE DSE 2 PLUS Instruction Manual online using the built-in PDF viewer.
DSE 2 PLUS Instruction Manual: Key Pages of Document
DSE 2 PLUS Dual HD Digital Signage Encoder INSTRUCTION MANUAL © 2015 R.L. Drake Holdings, LLC. Model Item # Description DSE 2 PLUS 1002583 HD Encoder with QAM Output ...
We recommend that you write the following information in the spaces provided below. This product incorporates copyright protection technology that is protected by U.S. patents and other intellectual property rights. Reverse engineering or disassembly is prohibited. Purchase Location Name: Purchase Location Telephone Number: DSE 2 PLUS Serial Number: ...
Table of Contents CAUTION STATEMENTS.......................................................................................................................................................... 4 IMPORTANT SAFETY INSTRUCTIONS.................................................................................................................................. 4 SPECIFICATIONS..................................................................................................................................................................... 6 INSTALLATION & POWER-UP................................................................... ...
Caution Statements REAR PANEL CONNECTIONS ..................................................................................................................................................................... 7 ETHERNET ACCESS ....................................................................................................................................................................................... 8 SETUP AND PROGRAMMING ................................................................................................................................................................... 10 FIRMWARE UPDATE .......... ...
Safety Instructions continued... 11. Power Sources: This product should be operated only from the type of power source indicated on the marking label. If you are not sure of the type of power supplied to your home, consult your product dealer or local power company. For products intended to operate from battery power, or other sources, refer to the product's operating instructions. 12. Grounding or Polarization: This product may be equipped with a polarized alternating-current line plug (a plug having one blade wider than the other). This plug will fit into the power outlet only one way. This is a safety feature. If you ...
Specifications ENCODER - VIDEO (Specifications are per Encoder) Video Inputs: VGA (with pass-through to monitor), HDMI (non-HDCP Copy Protected), Component (Y-Cr-Cb), Composite (via Y-Input for 480i) Video Resolution Modes: 480i (640x480 / 720x480 @ 30 fps), 480p (640x480 / 720x480 @ 60 fps), 720p (1280x 720 @ 60 fps), 1080i (1920x1080 @ 30 fps) Video Input Resolution Detection: Yes, automatic Video Compression Format: MPEG2 or MPEG4 / H.264 Video Adjustments: Brightness, Contrast, Hue, Saturation, Sharpness MPEG4 / H.264 Profiles Supported: Simple, Advanced Simple, High Bitrate: 0.000 to 19 Mbps (depending on format) E ...
Unpacking You will find the following items in the box: • DSE 2 PLUS Encoder Unit (QTY = 1) • Power Adapter (QTY = 1) Installation The DSE 2 PLUS is designed to be 1RU 19" rack mountable in the close proximity to a 120 VAC – 60 HZ power plug. Power-Up Plug the Power Adapter into a power plug (120 VAC – 60 HZ). Plug the power pin into the back of the DSE unit at the input marked “DC Power”. Installation & Power-Up .......................................................................................................................................... 8 ........................................................ ...
The DSE 2 PLUS encodes up to two uncompressed programs from devices with HDMI (non HDCP encrypted), High- Resolution Component Video, Composite or VGA outputs. The DSE 2 PLUS encodes the incoming programs to MPEG-2 or MPEG-4/H.264 compressed video. An internal multiplexing QAM modulator and low-noise upconverter allows programs to be combined with existing digital and or analog programming. • Encodes a HD & SD stream of the same content in either MPEG-2 or H.264 formats • Receives High-Resolution Component, VGA, or HDMI (non-HDCP content-protection) from two separate video sources. • Video encodes to MPEG-2 or MPE ...
RF Output: This type “F” connector is a high level (+29.5 dBmV to +45 dBmV), agile 5 to 1002 MHz, multiplexed output from the DSE2 Plus RF output section. DC Power Connector: This connector provides the means for connection to the 5 VDC output of the supplied external power supply. Component Input 2: These three color coded RCA connectors, Cr (red), Cb (blue), and Y (green), provide the means to input component video. To input composite video, use the green ‘Y’ connector. VGA Input 2: This VGA type connector provides the means to input VGA video from a computer or other device with VGA output. HDMI Input 2: This ...
Login Screen First, connect the appropriate input and output video cables and plug in the DSE 2 PLUS power cable. ETHERNET ACCESS: Local or remote communication with the unit is only possible through a GUI-based menu via any standard web browser (Chrome or Firefox recommended). Before you can communicate with the unit you must configure your computers Local Area Network connection to confirm with the DSE 2 Plus default IP of 172.16.80.1. To do so, follow these steps: Connect an Ethernet cable from your computer to the Ethernet connection on the rear panel of the DSE 2 Plus. 1. The following steps explain how to do this ...
1 2 Status Tab The status tab provides the following information (View only): The hardware version indicates the hardware version of the DSE 2 Plus The Uptime of the unit (days, hours, minutes, and seconds), which can be set on the System tab under Unit Description. 1 2 ...
Encoders Tab The Encoders tab allows you to set each encoder's individual parameters. Select an encoder module from the drop-down menu and the appropriate setting selections will be displayed. ...
Channels Tab The Channels tab provides an interface to configure the virtual channel mappings for this encoder host. If PSIP is enabled, this page will display a screen that looks as shown below; for each encoder output, the MPEG program number can be modified, along with the Major and Minor channel numbers. If one-part virtual channel numbers are desired, the PSIP Mode must be set to CVCT and the Minor number for each channel should be set to 0. ...
Output Configuration Tab System Configuration Tab The Output tab provides an interface to set all modulator output settings for the unit. The System Tab allows you to set a unique IP address for remote access and monitoring. Pressing the rear panel IP reset button will enable the default IP 172.16.80.1. The unique IP address previously set will also be retained. ...
Firmware Update Tab This tab uploads the newest available firmware for the DSE 2 PLUS and deploys firmware to the unit. While the firmware update tab is actively updating; the logging information and instructions are provided. When the update is completed, the unit will automatically reboot. ...
CATV Channel Frequencies CABLE TV CHANNELS Channel Number EIA/NCTA Equivalent Center of Channel Frequency (MHz) 2 3 4 5 6 57 63 69 79 85 95 96 97 98 99 93 99 105 111 117 14 15 16 17 18 123 129 135 141 147 19 20 21 22 153 159 165 171 7 8 9 10 11 12 13 177 183 189 195 201 207 213 23 24 25 26 27 219 225 231 237 243 28 29 30 31 32 249 255 261 267 273 33 34 35 36 37 279 285 291 297 303 CABLE TV CHANNELS Channel Number EIA/NCTA Equivalent Center of Channel Frequency (MHz) 38 39 40 309 315 321 41 42 43 44 45 327 333 339 345 351 46 47 48 49 50 357 363 369 375 381 51 52 53 54 55 387 393 399 405 411 56 57 58 59 60 417 423 429 43 ...
Broadcast TV & T Channel Frequencies VHF BROADCAST CHANNELS Channel Number Center of Channel Frequency (MHz) 2 3 4 5 6 57 63 69 79 85 7 8 9 10 11 177 183 189 195 201 12 13 207 213 UHF BROADCAST CHANNELS Channel Number Center of Channel Frequency (MHz) 14 15 16 17 18 19 473 479 485 491 497 503 20 21 22 23 24 509 515 521 527 533 25 26 27 28 29 539 545 551 557 563 30 31 32 33 34 569 575 581 587 593 35 36 37 38 39 599 605 611 617 623 40 41 42 43 44 629 635 641 647 653 45 46 47 48 49 659 665 671 677 683 50 51 52 53 54 689 695 701 707 713 55 56 57 58 59 719 725 731 737 743 60 61 62 63 64 749 755 761 767 773 65 66 67 68 69 77 ...
Service SERVICE INFORMATION 23 A Return Material Authorization (RMA) Number is required on ALL PRODUCT RETURNS (regardless of wheth- er the product is being returned for repair or for credit). Product that is received at the factory without an RMA Number will be returned to the Sender, unopened. RMA Numbers must be used when returning product for credit or repair. Use of RMA Numbers will ensure efficient processing. When needing to return your product to R.L. Drake Holdings, LLC., please follow these simple steps listed below (in the order that they appear). SERVICE REPAIRS ONLY CREDIT RETURNS ONLY 1. Contact R.L. D ...
Limited Warranty THREE YEAR LIMITED WARRANTY R.L. DRAKE LLC warrants to the original purchaser this product shall be free from defects in material or workmanship for three (3) years from the date of original purchase. During the warranty period the R.L. DRAKE LLC or an authorized Drake service facility will provide, free of charge, both parts and labor necessary to correct defects in material and workmanship. At its option, R.L. DRAKE LLC may replace a defective unit. To obtain such a warranty service, the original purchaser must: (1) Retain invoice or original proof of purchase to establish the start of the warranty p ...
Sales: 937-746-4556 • Support: 937-746-6990 • Fax: 937-806-1510 www.rldrake.com ...
Switch PDF Instructions
hp procurve switch gl modules installation guide www.hp.com/go/hpprocurve 1 F:\SWITCH\Gamma\modules\graphics\3013-cover.cdr Sunday, March 24, 2002 12:33:05 PM l f Black 80 lpi at 45 degrees
Thank you, and congratulations on your choice of the LVS-400. In addition to the LVS-400 functions you have come to know, LVS-400 Version 2.0 now also adds an “A/B mode.” A/B mode allows you to utilize the LVS-400 as an even more enhanced video switcher. T
Piping for the One-touch fitting •Insert the tube all the way into the fitting so that it cannot be pulled out. •Insertion with excessive force can cause damage. •Ensure there is no leakage after piping. •Use the product within the specified operating
IB01602046E For more information visit: www.eaton.com O & M Manual for 2-Position Contactor Based Non-Automatic Transfer Switch Instruction Booklet Description Page Introduction . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .