Dialogic IMG 1004 Quick Start Manual

Page 1 of 7 Dialogic® IMG 1004 Integrated Media Gateway Quick Start Guide Release 10.3.x / 10.5.x ...

Dialogic Corporation Part # 07-8724-00 Page 2 of 7 Copyright and Legal Notice Copyright © 2005-2008 Dialogic Corporation. All Rights Reserved. You may not reproduce this document in whole or in part without permission in writing from Dialogic Corporation at the address provided below. All contents of this document are furnished fo ...

Dialogic Corporation Part # 07-8724-00 Page 3 of 7 Hardware Limited Warranty Warranty for Hardware Products: Dialogic Corporation or its subsidiary that originally sold the hardware product ("Dialogic") warrants to the original purchaser of this hardware product, that at the time of delivery the hardware product supplied hereunder ...

Dialogic Corporation Part # 07-8724-00 Page 4 of 7 Quick Start Guide Overview - IMG 1004 Topic Location: IMG1004-Quick Start Guide Overview This IMG 1004 Quick Start Guide is an abbreviated guide which explains how to connect power and network cabling. For more information on setup please either refer to the “IMG 1004-Installatio ...

Dialogic Corporation Part # 07-8724-00 Page 5 of 7 Connecting and Configuring Network Management Port ‘CTRL’ The information below will provide the user with a basic setup sequence for connecting and configuring the IMG 1004 along with the GCEMS server to download system software and start configuring the IMG 1004 using the Cli ...

Dialogic Corporation Part # 07-8724-00 Page 6 of 7 GCEMS software installation. The GCEMS Server will need the most current system software in order to configure and provision the IMG 1004. The most current software can be obtained from the Dialogic Technical Support website. 1. Go to the Dialogic Technical Support Website at http: ...

Dialogic Corporation Part # 07-8724-00 Page 7 of 7  SS7 links are brought in over the Bearer Ports Starting ClientView to start Configuring Switch Once the IMG 1004 has software installed, the cabling is connected, and the GCEMS server has been configured then the ClientView application can be used to configure the IMG 1004. Bel ...