Audiolab 8300MB User Instructions

Text of Audiolab 8300MB User Instructions

Protect the power cord from being walked

on or pinched particularly at the plugs, convenience receptacles, and at the point where they exit from the apparatus. Use only with the cart, stand, tripod, bracket, or table specified by the manufacturer, or sold with the apparatus. When a cart or rack is used, use caution when moving the cart/apparatus combination to avoid injury from tip-over. Unplug this apparatus during lightning storms or when unused for long

•RCA/XLR Line input selector

•250W full power output •Support 4 ohm or 8ohm loudspeaker •0.5W ErP standard standby power consumption •Low THD Hi-end amplifier •Standby key control function •True balanced design for high-end sound quality Unpacking Unpack the product fully. The carton should contain: • The Audiolab 8300MB • One IEC power cord suitable for your area • This instruction manual If an item is missing or da

Signal Input Connections

Balanced XLR Connections: If you are connecting a Audiolab 8300MB mono power amplifier to the Audiolab 8300CD CD player, we strongly advocate the use of the balanced XLR connections. XLR inputs use 3 conductors, one for ground and two for the voltage plus and minus signals. In this way the signal transmitted to the amplifier is thus 'cleaner' and free from earth-induced currents and other air-borne interference. XLR interconnects s

The performance of amplifiers tends to stablize

after a period of use due to a number of factors associated with the physical and chemical properties of the components. We recommend that the system be run with a music signal for several hours when it is first installed. Although the changes can be quite subtle, after a few days the sound quality becomes smoother and more natural. Switching On The Audiolab 8300MB mono amplifier Mains on/

13/14 Glebe Road,

Huntingdon, Cambridgeshire, PE29 7DL, UK Tel: +44(0)1480 452561 Fax: +44(0)1480 413403 http://www.audiolab.co.uk CODE: AH14-MNL0004a

Audiolab Amplifier Owners Instructions: