Control M6004 Instruction Manual

For single stage heating, cooling or millivolt heating systems IMPORTANT: This thermostat is NOT compatible with any 120V or 240V high voltage control system. Read and understand this manual before installation or use. Instruction Manual model: M6004 Low-voltage (24 V or millivolt) system control BY/PAR CANARM ...

2 3 4 5 5 ...

use LOW VOLTAGE (24V or millivolt) control wires. Features • Temperature display in Centigrade or Fahrenheit (°C or °F) • Automatic temperature control – changing the temperature up to four times a day. • Humidifier con ...

• Read this instruction manual thoroughtly prior to the installation and the use of the thermostat. • Follow all instructions in this manual. • Keep this instruction manual for future reference. • Only clean this thermostat with a dry cloth. • Do not operate this thermostat with wet hands. • Do not block an ...

directly to wires carrying regular household voltage (120V /240V) as it would be dangerous. For details on compatibility of your particular equipment, please call our technical assistance line. HEATING/COOLING SYSTEMS ...

Thermostat should be mounted: • Approximately 5 ft (1.5m) from floor. • Near or in a frequently used room, preferably on an inside partitioning wall. • On a section of wall without pipes or duct-work. Thermostat should NOT be mounted: • Near a window, on an outside wall, or next to a door leading outside. � ...

Prior to replacing an old thermostat please test the system to make sure your heating and air conditioning systems are in working order. If there is any concern please consult a specialist. WARNING: Many old thermostats contain MERCURY and should be removed with caution and disposed of as a HAZARDOUS WASTE. Consult your local autho ...

WIRING COLOURS ARE NOT ALWAYS STANDARDIZED, IT IS VERY IMPORTANT TO LABEL ALL WIRES ACCORDING TO THE LETTER DESIGNATION ON YOUR OLD THERMOSTAT. (The wires are usually designated ‘W’, ‘Y’, ‘G’, ‘RH’, ‘RC’, ‘B’, ‘O ...

Y - Cool output H1 / H2 - Humidifer control Rc - Common for Cooling and Fan Rh - Common for Heating W - Heat output 2-Wire Heating Rc / Rh - Common (Rc and Rh jumper is optional) 3-Wire Heating Rc / Rh - Common (Rc and Rh must be connected with jumper) Wiring Diagrams Installation ...

(Rc and Rh must be connected with jumper) 5-Wire Heating/Cooling 2 separate transformers (Heat / Cool) Rc / Rh - Common (wire separately, jumper must not be installed) Wiring Diagrams 5-Wire Heating/Cooling Heat Transformer Cool Transformer 4-Wire Heating/Cooling ...