Teldat Router Operation & User’s Manual

File Specifications

Brand: Teldat
Category: Network Router
Model: Router (Operation & User’s Manual), prg2ahjlgV11M
File Info: Adobe Acrobat PDF (DjVu)
File Size:
Pages: 36 pages

Download PDF

Download Teldat Router Manual (36 pages)

Read Online:

Read the Teldat Router Operation & User’s Manual online using the built-in PDF viewer. This document explains how to operate the device, adjust settings and perform regular maintenance.

Key Pages of Document

1.2. DIAL Connection Profile

The following values must be programmed: remote-address: The remote-address value is always the same (*99***1#) and is the number providing access to the UMTS network. You do not need to program this as on programming a 3gpp-apn value, the remote address is automatically generated. 3gpp-apn: This is the UMTS node through which the connection is carried out. This value depends on the carrier. 3gpp-pdp-type: Programs the type of Protocol Data Packet to be used in the connection. This depends on the service provided by the carrier. Normally this is the IP which co ...

A UMTS network is made up of the following elements:

• Core Network. The Core Network incorporates transport and intelligence functions. The first ones support traffic and signaling information transport, including switching. The routing resides in intelligence functions consisting of features such as logical and the control of certain services offered through a series of well-defined interfaces; also including mobile management. Through the Core Network, the UMTS connects to other telecommunication networks thus allowing communication with both UMTS mobile users and for users connected to ...

icmp_seq=7. time=281. ms

----216.239.37.99 PING Statistics---- 10 packets transmitted, 4 packets received, 60% packet loss round-trip (ms) min/avg/max = 733/837/944 *hide TELDAT ROUTER– UMTS Configuration II - 19 Doc.DM757-I Rev.10.60 ...

Note: On listing the interface configuration, the PIN value is displayed in encrypted

mode. For the above example: Example: umts2/0 AT config>show conf ; Showing Menu and Submenus Configuration ... ; ATLAS Router 2 8 Version 10.5.1-Alfa pin ciphered 0xFEC7DB8210108C93 3.9. SPEED Permits you to configure the base interface data speed. Example: umts2/0 AT config>speed ? <9600..460800> Value in the specified range umts2/0 AT config>speed 460800 3.10. UMTS Permits you to configure UMTS options in the device. The options are as follows: Command Functions DOMAIN Selects the type of data dom ...

Note: The device, before each call, will always try and carry out an ATTACH to the

network in order to verify that it is still registered. Example: umts2/0 AT+gprs attach AT+CGATT=1 OK b) GPRS CELLIFO Dumps the information stored in the module regarding the base station it is serving. Not available for UMTS. c) GPRS DETACH Manually carries out a DETACH, de-register, to the GPRS or UMTS network. Example: umts2/0 AT+gprs detach AT+CGATT=0 OK +CGREG: 0 d) GPRS IMEI Provides the module IMEI (International Mobile station Equipment Identity). Example: umts2/0 AT+gprs imei AT+CGSN 500161111199050 ...

12/28/04 11:36:46 AT.020 Dialer UMTS command CIR_CONFIG local st 5 intf umts2/0

12/28/04 11:36:46 PPP.085 ppp1:umts2/0 CHAP required by peer 12/28/04 11:36:46 PPP.011 ppp1:umts2/0 In frame, type 0xc021, size 10 12/28/04 11:36:46 PPP.051 ppp1:umts2/0 LCP In DISC-REQ [opened] id 2 len 8 12/28/04 11:36:46 PPP.011 ppp1:umts2/0 In frame, type 0xc223, size 37 12/28/04 11:36:46 PPP.067 ppp1:umts2/0 CHAP In CHALLENGE [ack-sent] id 1 len 35 12/28/04 11:36:46 PPP.070 ppp1:umts2/0 CHAP Challenge 06c617dd5025ca43f4c9578c26fa8bd7 12/28/04 11:36:46 PPP.068 ppp1:umts2/0 CHAP Peer-Name UMTS_CHAP_S ...

Tuple #22, offset 0x12a, tuple_code 0x1b, link_length 0x12

1f 98 a3 60 e8 03 07 50 ff ff 48 c1 05 43 4f 4d 39 00 cftable_entry 0x1f [audio] io 0x03e8-0x03ef [lines=3] [8bit] [range] irq mask 0xffff [pulse] 7 bytes in subtuples Tuple #23, offset 0x13e, tuple_code 0x1b, link_length 0x0e 27 98 23 50 ff ff 48 c1 05 43 4f 4d 79 00 cftable_entry 0x27 [audio] io 0x0000-0x0007 [lines=3] [8bit] irq mask 0xffff [pulse] 7 bytes in subtuples + b) SYSTEM PCMCIA DUMP CIS-REG Displays information on how the card has been configured. Example: +system pcmcia dump cis- ...

Teldat Router user guide recommended for: ATLAS 160, Regesta Smart PLC, Teldat-3Ge, RS1800 Series, 3ge.

⚠️ Download Safety

The Network Router Operation & user’s manual (36 pages) is completely safe to download (last scan date: 05/05/2026).

Related PDF Instructions for Teldat Router:

Network Router Equipment: Frequently Requested

Have some Questions about Teldat Router Device?

Get valuable and actionable advices from other Teldat Router device users. Describe your problem or question, regarding the using of Router, in as much detail as possible, and other users will be able to answer you.