KERN ALJ Manuals

KERN ALJ Operating manual (78 pages)

• Identifier: id-995348
• Brand: KERN
• Device: KERN ALJ Scales
• Type: Operating manual, PDF
• Key Aspects: Instructions for Connecting Additional Modules, Calibration and Adjustment Methods, Emergency Procedures
• UPD Date: 27.04.2026
• Source File: 1163139.pdf
• Pages: 78
• Description: Operating manual for the KERN ALJ. This documentation covers system checks, maintenance guidelines, operating modes, adjustment procedures.

Key Pages and Contents:

• Menu overview models PLJ-M:

  Menu item Display Selection Description Weighing unit (see chap. 9.1) Units Gram Gramm * Carat Carat * Ounce Unze * Pound Pound * PEnn Pennyweight * OuncEtr Troy Unze * GrAin Grain * tAEL Hon Tael Hongkong * tAEL SGP Tael Singapore * tAEL roc

• 9.9 Automatic switch-

  in stand-by mode In weighing mode press the MENU button and keep it pressed until the acoustic signal gets mute. Press MENU button repeatedly Acknowledge using PRINT button, the current setting is displayed. Press the arrow keys to select desir

• Weighing range (max)

  160 g 250 g 310 g Readability (d) 0.1 mg 0.1 mg 0.1 mg Reproducibility 0.1 mg 0.1 mg 0.1 mg Linearity ± 0.3 mg ± 0.3 mg ± 0.3 mg Verification value (e) 1 mg 1 mg 1 mg Verification class I I I Minimum load (M

• 4 Basic Safety Precautions

  4.1 Pay attention to the instructions in the Operation Manual Carefully read this operation manual before setup and commissioning, even if you are already familiar with KERN balances. Versions in other languages are non-binding translations. Th

KERN ALJ Operating manual (101 pages)

• Identifier: id-2157134
• Brand: KERN
• Device: KERN ALJ Scales
• Type: Operating manual, PDF
• Key Aspects: Common Issues and Solutions, Installation Planning Strategies
• UPD Date: 03.07.2026
• Source File: 2130501.pdf
• Pages: 101
• Description: Device setup manual for the KERN ALJ. The manual provides step-by-step instructions on wiring setup, software installation, daily usage, firmware installation.

Key Pages and Contents:

• 11.4 Auto zero

  This menu item enables to switch on or off the automatic zero point correction. In the switched on state, the deviation or zero point disturbance is corrected automatically. Tip: If the amount of the weighed material is reduced or increased

• 13 RS-232C interface

  A standard scale is equipped with a RS-232C interface used to connect a peripheral device (e.g. a printer or a computer). 13.1 Technical specification  8-bit ASCII code  8 data bits, 1 stop bit, no transparency bit  t

• Product number / type

  TPLJG 420-3-A TPLJG 720-3-A TPLJG 1200-3-A Weighing range (Max) 420 g 720 g 1200 g Interval (d) 0.001 g 0.001 g 0.001 g Reproducibility 0.001 g 0.001 g 0.001 g Linearity ±0.003 g ±0,002 g ±0,

• 3.3 Display overview

  Item Name 1 Weighing range indicator 2 Stabilization indicator 3 Zero indicator 4 Weighing value 5 Unit 6 Current time 7 Current date Symbol Description see chapter Stabilization indicator + chapter 9.3 Zero indicator + chapter 9.3 Th

KERN ALJ Operating instructions manual (34 pages)

• Identifier: id-962761
• Brand: KERN
• Device: KERN ALJ Scales
• Type: Operating instructions manual, PDF
• Key Aspects: Recovery Procedures After Failures, User Group Forum Links, Usage Scenarios for Beginners
• UPD Date: 23.04.2026
• Source File: 1195745.pdf
• Pages: 34
• Description: Device instruction guide for the KERN ALJ. This documentation provides step-by-step guidance on safety protocols, system configuration, technical guidelines.

Key Pages and Contents:

• 9 Data output RS 232 C

  9.1 Technical Data ƒ 8-bit ASCII code ƒ 8 Data bits, 1 stop bit, no parity bit ƒ Baud rate selectable for 300, 600, 1200, 2400, 4800 and 9600 Baud ƒ Miniature plug necessary (9 pol D-Sub) ƒ For operation with interface faultless operation is ensured only with the respecti

• 7.5 Parts counting

  You are weighing e.g. 10 identical parts; i.e. the reference quantity is 10. The balance will automatically calculate the average weight per part. From now the pieces to be counted are displayed as number of parts. As a rule: The higher the reference quantity the higher the counti

• 6 Unpacking, installation and commissioning

  6.1 Place of installation, place of use The balance is constructed in such a way that reliable weighing results can be achieved under normal application conditions. By selecting the correct location for your balance, you will be able to work quickly and pr

• 7.2.1 Simple weighing

  Operation: Display: Ö Use the ON/OFF-button to turn on the balance Ö As soon as the weight display shows „0.000" your balance is ready for weighing 0,0000 Ö Place items to be weighed on balance, the weighed value is displayed. 19.6879 g Ö Pressing the F-butt