BW Technologies MicroDock Quick Reference Manual

BW Technologies Ltd. (BW) warrants this product to be free from defects in material and workmanship under normal use and service for a period of two years, beginning on the date of shipment to the buyer. This warranty extends only to the sale of new and unused products to the original buyer. BW’s warranty obligati ...

BW Technologies MicroDock Safety Information - Read First Use the Station only as specified in this guide. Read the following Cautions before using the Station. a Cautions ⇒ If the Station is damaged or something is missing, contact BW Technologies immediately. ⇒ We recommend that the Station be attached to a venting system or that the Station be u ...

BW Technologies MicroDock for the MicroDock. Refer to the User Manual on the accompanying CD-ROM for complete operating instructions. The MicroDock Automatic Test and Calibration Station (“the Station”) provides automated calibration and bump testing for the GasAlertMicro multi-gas detector. The sy ...

cylinders for both the zero gas and the four-gas mixture can be entered. This option displays the software version of the Station. This option controls the stations pump speed. The Station is shipped with English as the displayed language. To select French, press sel C. Maintenance To keep the Station in good o ...

User Option Menu The Station has the following user options: 1. Results History 2. Connect to PC 3. Time/Date 4. Contrast 5. Backlight 6. Gas Inlets 7. About 8. Pump Set up 9. Francais Note: Bump or calibration tests performed while the User Option menu is activated are initiated once the menu is exited. To access User Options ...

BW Technologies MicroDock Specifications The MicroDock is used for general purposes only. Operating Temperature: +10 to +45 °C (50 to +113 ºF) Storage Temperature: -10 to +60 °C (14 to 140 ºF) Power Supply: 6VDC wall adapter (level 3 ITE power supply) or four C-cell batteries Real-Time Clock: Provides time and date stamp for the last calibration ...

BW Technologies MicroDock Parts of the MicroDock Item Function A LCD display B Zero air inlet (inlet 1) C Calibration gas inlet (inlet 2) D Activation buttons E Base station F Power connection G USB connection H Battery cover I Docking module lid J Vent outlet K Detector bay L Docking module M Bump and calibrate activation buttons and status LEDs 3 ...

BW Technologies MicroDock Warranty: 2 years Approvals: X European Conformity 15 ...

How to Use the Base Station Since the Base Station pushbuttons are not labelled, you need to refer to the LCD. You can operate the Station by pressing the pushbutton under the corresponding option. Activating the Station To activate the Station, connect power or if power is connected, press any C on the Base Station. Sel ...

2. Activate the detector and wait until it is in normal operating mode. Note: Ensure the detector is not in a low battery state. Note: Rotate the alligator clip ring on the GasAlertMicro so it fits into the groove located on the Docking Module. 3. Insert the detector into the detector bay. A small space below the detector is e ...