ADLINK Technology COM Express Express-BL Operation & User’s Manual

Serial Port Device Settings Change Settings Device Mode Enabled Disabled IO=2F8h; IRQ=4 Auto IO=2F8h; IRQ=3 IO=3F8h; IRQ=3,4,5,6,7,10,11,12 IO=2F8h; IRQ=3,4,5,6,7,10,11,12 IO=3E8h; IRQ=3,4,5,6,7,10,11,12 IO=2E8h; IRQ=3,4,5,6,7,10,11,12 Standard Serial Port Mode IrDA Active pulse 1.6 uS IrDA Acti ...

ADLINK Technology COM Express Express-BL 4.6.1. Switch Locations PCI Express Configuration Switch BIOS Select and Mode Configuration Switch ...

ADLINK Technology COM Express Express-BL The following terms are used in the COM Express AB/CD Signal Descriptions below. I Input to the Module O Output from the Module I/O Bi-directional input/output signal OD Open drain output I 3.3V Input 3.3V tolerant I 5V Input 5V tolerant O 3.3V Output 3.3V signal level O 5V Output 5V signal level I/O 3.3V Bi-direct ...

ADLINK Technology COM Express Express-BL 6.1. System Memory Map Address Range (decimal) Address Range (hex) Size Description (4GB-2MB) FFE00000 – FFFFFFFF 2 MB High BIOS Area (4GB-18MB) – (4GB-17MB-1) FEE00000 – FEEFFFFF 1 MB MSI Interrupts (4GB-20MB) – (4GB-19MB-1) FEC00000 – FECFFFFF 1 MB APIC Configuration Space 15MB – 16MB F00000 – FFFFFF 1 M ...

ADLINK Technology COM Express Express-BL Feature Options Description ACPI and Power Management Info only Enable ACPI Auto Configuration Enabled Disabled Enables or Disables BIOS ACPI Auto Configuration. Enable Hibernation Enabled Disabled Enables or Disables System ability to Hibernate (OS/S4 Sleep State). This option may be not effective with som ...

0x6D North Bridge DXE initialization (North Bridge module specific) 0x6E North Bridge DXE initialization (North Bridge module specific) 0x6F North Bridge DXE initialization (North Bridge module specific) 0x70 South Bridge DXE initialization is started 0x71 ...

ADLINK Technology COM Express Express-BL LED1 LED2 LED3 ¾ LED Descriptions: Name Color Connection Function LED1 Blue BMC output Power Sequence Status Code (BMC) Power Changes, RESET (see 5.1.4 Exception Codes below) LED2 Green Power Source 3Vcc S0 LED ON S3/S4/S5 LED OFF ECO mode LED OFF LED3 Red B ...

ADLINK Technology COM Express Express-BL The Express-BL can be used with the PCIe x16-to-two-x8 Adapter Card on the Express-BASE6 Reference Carrier to support bifurbication of the CPU's PEG interface (PCIe x16). The card reroutes the PCIe x16 to two x8 and allows testing of two independent PCIe add-on cards with x8/x4/x2/x1 width. To use the c ...

ADLINK Technology COM Express Express-BL This section of this document lists checkpoints and beep codes generated by AMI Aptio BIOS. The checkpoints defined in this document are inherent to the AMIBIOS generic core, and do not include any chipset or board specific checkpoint definitions. Checkpoints and Beep Codes Definition A checkpoint is either ...

ADLINK Technology COM Express Express-BL Info only Clock3 Submenu *Note1 CLKRUN# Logic Enabled Disabled Enable the CLKRUN# logic to stop the PCI clock. Note1: The item is view only in standard BIOS default, the options can be opened by customer request if neccessary. 7.3.11.3. Clock3 Feature Options Description Clock3 info only ...

ADLINK Technology COM Express Express-BL ¾ Power Modes: AT and ATX mode (AT mode startup controlled by SEMA) ¾ Standard Voltage Input: ATX @ 12V±5%,/ 5Vsb ±5% or AT @ 12V ±5% ¾ Wide Voltage Input: ATX @ 8.5-20V, 5Vsb ±5% or AT @ 8.5-20V ¾ Power Management: ACPI 5.0 compliant, Smart Battery support ¾ Power States: supports C1-C6, S0, S4, S5, S5 ECO mode (W ...

ADLINK Technology COM Express Express-BL To perform a hardware reset of BIOS default settings, perform the following steps: 1. Shut down the system. 2. Press the BIOS Setup Defaults Reset Button continuously and boot up the system. You can release the button when the BIOS prompt screen appears 3. The BIOS prompt screen will display a confirmation that B ...