Amit RRAM-MCT/D20 Operation Manual

Part 4-29: Testing and measurement techniques – Voltage dips, short interruptions and voltage variations on d.c. input power port immunity tests Complies EN 60068-2-1:2007 Environmental testing – Part 2-1: Test A: Cold Complies EN 60068-2-2:2007 Environment ...

Amit RRAM-MCT/D20 Document name: rram-mctd20_g_en_100.pdf Author: Lukáš Čeřovský Revision Date Changes 100 18. 6. 2013 New document Related documentation 1. o o e es o s e e e o k file: ap0037_en_xx.pdf ...

Amit RRAM-MCT/D20 12.1. Ordering information RRAM-MCT/D20 Package, see chapter 12.2 12.2. Scope of delivery Part Quantity Intercom for rolling stock 1 Connector counterpart WAGO769-108 1 Operation manual 1 Routine testing protocol 1 Insulation testing protocol 1 Warranty certificate 1 12.3. Access ...

Amit RRAM-MCT/D20 The equipment meets the claims of Czech government decree NV616/2006; the conformity assessment has been performed in accordance with harmonized standard EN 50121-3-2 ed. 2. Tested in accordance with standard Type of test Classification EN 55011 ed. 3 Radio disturbance 4 dBμV / 4 dBμV EN 610 ...

Factory setting of IP microtelephone unit is activated by pressing the button RESTORE on the front panel while unit powering is switched on. The small button can be pressed by blunt tiny stick like ballpoint refill etc. Release the buuton after triple LED blink. RESTORE Fig. 1 ...

Amit RRAM-MCT/D20 0.08 mm2 to 4 mm2 Power supply PoE Power consumption 5 W PoE standard according to 802.3af PoE Class 2 *) Choose one of two possible powering ( 24 V DC or PoE). Mechanical construction Sheet metal cover Color RAL 9005 Mounting To the base, M4 screws Ingress protection rat ...

Amit RRAM-MCT/D20 To the IP microtelephone unit can be connected a source of sound signal. Support of this input depends on used application. Sound input connector Fig. 11 - Location of connector for sound signal The sound signal is connected through standard BNC connector. ...

IP microtelephone unit has two digital inputs intended for unit configuration. Their meaning is given by user application. Digital inputs Fig. 5 - Location of connector with digital inputs By coupling terminals AD1 and AD2 with common terminal COM is the input activated. The not-connected input is in ...

Amit RRAM-MCT/D20 The microphone is connected to IP microtelephone unit through D-sub DE-9 connector. Microphone itself is not supplied together with microtelephone unit, it must be ordered separately. RRAS-GNM/A Connector Fig. 6 - Location of connector for microphone Terminal Signal Signal type on RRAM-MCT/D ...

Amit RRAM-MCT/D20 publication and reserves the right to change the documentation without obligation to inform any body or authority about it. This document can be copied and redistributed under following conditions: 1. The whole text (all pages) must be copi ...