Santec 9527KL-TM Installation Instruction

KLASSICA COLLECTIONS Please read the instructions completely before beginning the installation. Klassica I Collection Model Number: 9527KL-TM Model Number: 9529KL-TM Klassica II Collection Model Number: 9527KR-TM Model Number: 9529KR-TM Flush both supply lines before installation, then shut off both supply lines. Minimum hole size for the spout and handle trim is 1-1/4” and maximum of 1-1/2” Rev 06/2016 The measurements shown are for reference only. Products and specifications shown are subject to change without notice. www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681 1/6 Klass ...

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681 2/6 NOTE: The length of threaded pipe coming out from the finish wall should be no longer than 1/2”. WARNING: Do not use excessive force when threading the spout. - Wrap the pipe threading for the spout with teflon tape. Then, thread the spout onto the pipe until it is secured with the spout facing downward. SPOUT INSTALLATION 1 Thread the bonnet nut, all thread, and insert the broach assembly onto the valve and lightly tighten assembly with a 1” plumber’s socket Wren ...

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681 PARTS DRAWING 3/6 * Please specify the finish when ordering the part. # PART DESCRIPTION PART # 1 Spout Body PS-4A00-1 2 Spout Flange Connecting Bell P00150 3 Handle Assembley KL,KR,KT 4 Flange PH1018 5 Handle Hub PH1020 6 Counterweight PH1021 7 Klassica Traditional Lever PH1022 8 Teflon Washer PM-099 9 Valve Adaptor PM-090 10 Washer PM-184 11 Screw PM-179 12 Rubber Washer PM-407 13 Steam Extension SA240 14 Adaptor for Shower Handle P0477 15 20K Broach Extension PM-007-1 # PA ...

www.santecfaucet.com | P: 310.542.0063 F: 310.542.5681 4/6 Ø 2 14" 1 116" 3 516" 12" Ø 1 14" 258" 434" 41116" 258" 91516" ...

spotting and water deposit build-up. A mild liquid hand soap may be used occasionally if desired. Use of a non-abrasive carnauba wax will add protection to the finish and should be used if the faucets will not be dried after use. For clear coated finishes, it is recommended to clean your product weekly with a soft moist cloth. WARNING: Do not clean your SANTEC product with ammonia (Window cleaner), bleach, soap, acids, abrasives, harsh polish, harsh cleaners, a coarse surfaced cloth, coarse sponge, or any type of scouring pad. Doing so may ruin y ...

SANTEC is committed to enhancing your bathroom experience by creating luxury products that will provide enduring satisfaction. Every effort has been made to satisfy the highest standards of design and production, to create lasting peace of mind for our customers. We provide the following limited warranties on our products: LENGH OF WARRANTY & WHO IS COVERED BY OUR WARRANTY This warranty extends to the original consumer purchaser only and extends for as long as the original purchaser owns the product and the home in which the product is installed. WHAT IS COVERED BY OUR WARRANTY FINISHES: SANTEC Polished Chrome, Polished Nickel ...