Overland Storage Spare Fan Instructions

Page 1 of 4 *10400416-001* SnapServer™ DX2 / SnapScale™ X2 Node Spare Fan Instructions This document describes how to remove and replace a fan in a SnapServer DX2 appliance or SnapScale X2 node from Overland Storage. WARNING: To reduce the risk of electric shock or damage to equipment, always remov ...

Page 2 of 4 Spare Fan Instructions Remove the Drives IMPORTANT: Overland recommends that you remove the disk drives to reduce the unit’s weight prior to removal. They must be replaced in the same slots when done. NOTE: Do not remove the disk drives from their carriers. Doing so voids the drive warran ...

Page 3 of 4 Spare Fan Instructions Replace the Fan Remove Old Fan 1. Locate the fan being replaced and unplug its cable from the motherboard. 2. Carefully cut the cable ties holding the cable to the chassis. Fan cables 1 and 2 are tied down together. 3. Carefully pull the cable out through the fan bulkh ...

Page 4 of 4 http://support.overlandstorage.com You can get additional technical support on the Internet at the Overland Storage Support web page, or by contacting Overland Storage using the information found on the Contact Us page on our web site. Spare Fan Instructions Reinstall the Drives Return the d ...