Bodine CF94 Installation Instructions
Text of Bodine CF94 Installation Instructions
READ AND FOLLOW ALL SAFETY INSTRUCTIONS
! IMPORTANT SAFEGUARDS !
WHEN USING ELECTRICAL EQUIPMENT, BASIC
SAFETY PRECAUTIONS SHOULD ALWAYS BE
FOLLOWED, INCLUDING THE FOLLOWING:
SAVE THESE INSTRUCTIONS
THIS PRODUCT CONTAINS A RECHARGEABLE NICKEL-CADMIUM BATTERY.
THE BATTERY MUST BE RECYCLED OR DISPOSED OF PROPERLY.
© Philips Emergency Lighting
A Division of Ph
INSTALLING THE EMERGENCY BALLAST
> Mount the emergency ballast and battery inside the fixture.
STEP #2
INSTALLING THE TEST SWITCH
> Install the test switch on the fixture so it can be accessed after
fixture installation.
> See illustration below showing basic switched and unswitched
fixture connections for test switch installation. Refer to the
di
When AC power is applied, the charging indicator light is illuminated, indicating the battery is being charged. When
power fails,the emergency ballast automatically switches to emergency power, operating one lamp at reduced
illumination. When AC power is restored, the emergency ballast returns to the charging mode and delays AC ballast
operation for five sec
FIG A ONE (1) LAMP CIRCLINE RAPID START BALLAST
FIG B TWO (2) LAMP CIRCLINE RAPID START BALLAST
FIG C ONE (1) FOUR PIN COMPACT LAMP RAPID START BALLAST
FIG E TWO (2) FOUR PIN COMPACT LAMP RAPID START BALLAST
FIG F ONE (1) FOUR PIN COMPACT LAMP WITHOUT AC BALLAST
FIG G TWO (2) FOUR PIN COMPACT LAMPS WITHOUT AC BALLAST
(Two lamp emergency