Turnstone TS395-02 Quick Start Manual
Text of Turnstone TS395-02 Quick Start Manual
Page 1 of 2
TS395A Rev B
TS395A
R
© 2001 Steelcase Inc.
Grand Rapids, MI 49501 U.S.A.
Printed in U.S.A.
1. Insert the shafts of the casters
into their corresponding sockets
of the base . Push in firmly.
Stand the base upright.
3. Assemble cylinder cover
Slide cylinder (A) up through cylinder
(B) (see fig 1). With cylinder (A) en-
gaged with cylinder (B), slide cylinder
(C) down over cylinders (A and B)
(see fig 2). Refer to fig. 3 for completed
ass
Page 2 of 2
TS395A Rev B
6. Remove the knob from the control (Fig. 1). Push bottom
end of the upright into the channel at the back of the control
plate (Fig. 2) and tighten the seat hand wheel knob, as
shown (Fig. 3).
Fig. 1
Fig. 2
Fig. 3
5. Insert the cylinder into the seat
control plate assembly, as shown.