Mircom QMP-5100AX Installation Instructions

Text of Mircom QMP-5100AX Installation Instructions

Master Paging Control Module and

QMP-5100MSB Microphone Splitter Board LT-903 Rev. 3 Oct 2009 Installation Instructions

QMP-5100AX Master Paging Control Module (without

microphone) The QMP-5100AX is a paging control module without a microphone. This module is used for each building in a multiple building set up with one master paging microphone (QMP-5100B or QMP-5101B used with a QMP- 5100MSB Microphone Splitter Board) . Maximum number of buildings is four. The QMP-5100AX M

Below is a diagram showing the interconnection required for multiple building and master paging from one building.

Figure 1: QMP-5100AX and QMP-5100MSB Interconnection Drawing QMP-5100B/5101B QMP-5100B/5101B QMP-5100AX AUDIO 1 AUDIO 1 AUDIO 2 AUDIO 2 PTT 1 PTT 1 PTT 2 PTT 2 MAIN MAIN BUP BUP LOCATION 1 LOCATION 2 CONTROLS LOCATION 2 QMP-5100MSB MICROPHONE S

25 Interchange Way

Vaughan, ON L4K 5W3 Tel: 905-660-4655 Fax: 905-660-4113 © Mircom 2009 Printed in Canada Subject to change without prior notice www.mircom.com U.S.A. 4575 Witmer Industrial Estates Niagara Falls, NY 14305 Tel: 1-888-660-4655 Fax: 1-888-660-4113

Mircom Control Unit Owners Instructions: