Rae EntryRAE Manual
Text of the manual
• EntryRAE Features
• Daily Start-up
• Pump Cycle
• Monitor Mode
• Programming Mode
• Calibration
• AutoRAE Docking Station
• 5-sensor confined space entry monitor
– PID (0-999 ppm VOCs) (10.6 eV lamp)
– Oxygen (0-30% vol)
– LEL (0-100% LEL)
– H2S (0-100 ppm)
– CO (0-500 ppm)
– Displays STEL, TWA, High and Low values
• Programmable STEL, TWA, High and Low
alarm settings
• Up to 16 hours typical with Li-ion battery
• Drop-in charging station
with PC connectivity
• Fast access to sensors
and battery
Vehicle Mount with latch
(optional accessory)
• AutoRAE docking station for automated
bump test and calibration system (optional
accessory)
There are 2
main steps to
start-up:
1.Turn on the
monitor
2.Do a fresh air
calibration
Turn the Monitor On
To turn on the EntryRAE,
press the (mode) key
for 1 second
The monitor will perform a
warm-up sequence