Rae P-1400 Operation Manual

Text of the manual

This manual contains technical information for the

P-1400 Loop Detector pn 889-1600-04 Revision: April 2020 P-1400 Loop Detector Firmware Version 4.02 Operations Manual Four Channel Menu Drive Programmable Inductive Loop Vehicle Detector Designed for Railroad Applications Four Loop Inputs, Two Vital Outputs, and One Vital Input Built-in Loop Analyzer for Eac

THE FOLLOWING PRODUCT WAS DESIGNED, INSPECTED, TESTED AND

MANUFACTURED IN THE USA BY EBERLE DESIGN, INC. IN PHOENIX, ARIZONA. INFORMATION CONTAINED HEREIN IS PROPRIETARY TECHNICAL INFORMATION OF EBERLE DESIGN, INC. PUBLICATION, REPRODUCTION OR USE IN WHOLE OR PART IS NOT PERMITTED EXCEPT UNDER TERMS AGREED UPON IN WRITING. ALL REGISTERED TRADEMARKS OF EBERLE

Model P-1400 Operations Manual

Table of Contents Section 1 General Description ................................................................................................................................ 1 Section 2 General Characteristics ....................................................................................................................

Model P-1400 Operations Manual Rev Apr 2020 Page 1 of 33

Section 1 General Description This product manual was written for people installing, operating, and maintaining the Reno A&E Model P-1400 inductive loop vehicle detector. The Model P-1400 is a four-channel inductive loop vehicle detector designed as a direct, drop-in replace

Model P-1400 Operations Manual Rev Apr 2020 Page 2 of 33

Section 2 General Characteristics 2.1 LOOP FREQUENCY There are eight selectable loop frequency settings (normally in the range of 20 to 100 kilohertz) per loop input. The actual loop operating frequency is a function of the loop / lead-in network and the components of the loo

More Rae Security Sensors Owners Instructions: