MacDon D1X Series Unloading And Assembly Instructions

Draper Header Unloading and Assembly Instructions (North America) 215489 Revision A Original Instruction The Harvesting Specialists. ...

������� Published: January 2021 © 2021 MacDon Industries, Ltd. The information in this publication is based on the information available and in effect at the time of printing. MacDon Industries, Ltd. makes no representation or warranty of any kind, whether expressed or implied, with respect to the information in this publication. MacDon Industries, Ltd. reserves the right to make changes at ...

Draper Headers for M1 Series Windrowers. ������� � � Figure 1: M1240 Header Hydraulics Configurations NOTE: Confirm the windrower is equipped with a draper-ready header drive BEFORE connecting to the header: • All M1170 header drives are draper-ready. • If the M1240 header drive is configured to only operate ...

At MacDon, we’re continuously making improvements, and occasionally these improvements affect product documentation. The following list provides an account of major changes from the previous version of this document. Section Summary of Change Internal Use Only 2.1 Unloading Header from Trailer, page 7 Revised topic. Some contents moved to 9.2 Header Specifications for Unloading and Assembly, page 109 Engineering 2.1 Unloading Header fr ...

Chapter 1: Safety ............................................................................................................ ...

6.6 Reel Clearance to Cutterbar................................................................................................................... 67 6.6.1 Measuring Reel Clearance ............................................................................................................. 6 ...

bystanders. 1.1 Signal Words Three signal words, DANGER, WARNING, and CAUTION, are used to alert you to hazardous situations. Two signal words, IMPORTANT and NOTE, identify non-safety related information. Signal words are selected using the following guidelines: DANGER Indicates an imminently hazardous sit ...

������� Figure 1.1: Safety Equipment CAUTION The following general farm safety precautions should be part of your operating procedure for all types of machinery. Wear all protective clothing and personal safety devices that could be necessary for the job at hand. Do NOT take chances. You may need the following: • Hard hat • Protect ...

• Wear close-fitting clothing and cover long hair. NEVER wear dangling items such as scarves or bracelets. • Keep all shields in place. NEVER alter or remove safety equipment. Make sure driveline guards can rotate independently of shaft and can telescope freely. • Use only service and repair parts made or approved by equipment manufacturer. Substituted parts may not meet st ...

windrower. WARNING Severe damage to sensitive, expensive electronics can result from welding on the header while it is connected to the windrower. It can be impossible to know what effect high current could have with regard to future malfunctions or shorter lifespan. It is very important that weld ...

has to take extra precautions before operating controls. Operator manuals and technical manuals identify the location and meaning of all safety signs placed on the machine. ������� Figure 1.7: Operator’s Manual Decal • Keep safety signs clean and legible at all times. • Replace ...

Perform all procedures in this chapter in the order they are listed. 2.1 Unloading Header from Trailer In North America, headers are shipped on flat bed trailers. Following instructions carefully will help ensure headers make it from the trailer to the assembly area safely.. DANGER To avoid injury to bystanders from being struck by machinery, do NOT allow people to stand in unloading area. DANGER Equipmen ...

4. For D1XL: Approach one of the headers and slide forks (A) through four forklift brackets (B) underneath the shipping support, as far as possible without contacting the shipping support of second header (C). IMPORTANT: Avoid lifting the second header and ensure the forks do NOT interfere with the shipping frame. If the forks contact the second header, the head ...

The procedure for lowering the header varies depending on whether the header has a single or double reel. To lower the header, refer to the procedure according to the type of header: • Single-reel headers: refer to 2.2.1 Lowering Single-Reel Header, page 9 • Double-reel headers: refer to2.2.2 Lowering Double-Reel Header, page 12 2.2.1 Lowering Single-Reel Header Lower the header to field positio ...

CAUTION Stand clear when lowering, as machine may swing. 3. Back up SLOWLY while lowering the forks until the header is just above the ground. Refer to the four positions in the illustration. UNLOADING THE HEADER ...

4. Place 150 mm (6 in.) blocks (A) under each end and at the center of the cutterbar, then lower the header onto the blocks. 5. Remove the chain and move the lifting vehicle to the rear of the header. ������� � Figure 2.6: Center-link Anchor – Single-Reel 6. Attach the chain to center-link anchor (A) on the frame tube and raise the rear of the header so that ...

7. Lower the header stand by pulling pin (A), lowering stand (B), and releasing pin (A) to secure the stand in place. 8. If the ground is soft, place a block under the stand. 9. Lower the header onto the stand. 2.2.2 Lowering Double-Reel Header Lower the header to field position to prepare it for assembly and setup. IMPORTANT: For lifting equipment requirements, refer to 9.2 Header ...

CAUTION Stand clear when lowering, as machine may swing. 3. Back up SLOWLY while lowering the forks until the header is just above the ground. Refer to the four positions in the illustration. UNLOADING THE HEADER ...

4. Place 150 mm (6 in.) blocks (A) under each end and at the center of the cutterbar, and then lower the header onto the blocks. 5. Remove the chain and move the lifting vehicle to the rear of the header. ������� � Figure 2.12: Center-Link Anchor – Double-Reel 6. Attach the chain to center-link anchor (A) on the frame tube and raise the rear of the header so ...