Stack-On QAS-450-B Instructions Manual
Text of Stack-On QAS-450-B Instructions Manual
40287-1307 1 18
Serial #:
®
Instructions
Model No. QAS-450-B
CONTROL FEATURES
1. Key lock
2. START button
3. Fingerprint scanner
4. Red indicator light
5. Green indicator light
6. Reset button (inside safe)
7. Battery Compartment (inside safe)
When you first receive your safe you will need to open
the door with the key in order to install the batteries.
Batteries are included and are located inside the safe.
To open the safe, insert key into lock a
40287-1307 2 18
INSTALLING THE BATTERIES
NOTE: Do not mix old and new batteries. Do not
mix alkaline, standard or rechargeable batteries.
Push the battery cover locking tab with a screwdriver
to release the cover. Install the (4) AA alkaline
batteries as shown. Replace the cover by inserting
the rear tabs in the slots and snapping the cover in
place.
NOTE: If the batteries are low the red indicator will
stay on after scanning. Replace with 4 new AA
a
40287-1307 3 18
Repeat scanning the same finger while listening for
the single “beep” for each successful scan. As you
continue to scan, the scanner is “learning” your
fingerprint. After a minimum of 5 scans and possibly
many more, the safe will eventually “beep” 2 times
indicating the fingerprint has successfully been
recorded.
1. To record a fingerprint, press the Reset Button (6)
on the inside of the safe. One “beep” will sound and
t
40287-1307 4 18
STACK-ON PRODUCTS CO.
P.O. BOX 489, WAUCONDA, IL 60084
IMPORTANT
Keep your keys in a secure place, away from
children. Keep this record of your serial number in a
secure place separate from your safe. To order a
replacement key set, follow the instructions on the
attached form.
CLEARING THE MEMORY OF ALL
RECORDED FINGERPRINTS
NOTE: After you delete all the recorded
fingerprints, your safe will open by pressing the
START button (2). For
“This is not a Registration Form”
Verification of ownership is required in order to receive replacement key for your security product.
In order to receive a replacement key to your security product:
1.
Complete the following form and send to Stack-On Products.
2.
Send a copy of your valid driver’s license along with the form.
3.
Send a copy of the receipt showing the original purchase.
4.
Security product owner must sign form.
5.
Owner�
40287-1307 6 18
THIS WARRANTY GIVES YOU SPECIFIC LEGAL RIGHTS. YOU MAY ALSO HAVE OTHER RIGHTS
WHICH VARY FROM STATE TO STATE.
IN NO EVENT SHALL STACK-ON’S OBLIGATION UNDER THIS WARRANTY EXCEED THE PRICE
OF THE PRODUCT.
STACK-ON’S LIABILITY FOR ANY BREACH OF THIS WARRANTY SHALL BE LIMITED
EXCLUSIVELY TO REPAIR OR REPLACEMENT OF THE DEFECTIVE PRODUCT, AS DESCRIBED
ABOVE, OR A REFUND OF THE PURCHASE PRICE OF THE PRODUCT.
STACK-ON WILL NOT, UNDER ANY CI
Pour ouvrir le coffre-fort, insérez la clé dans la
serrure et tournez-la dans le sens horaire jusqu’à ce
que la porte s’ouvre automatiquement.
REMARQUE : Vous devez ramener la clé en
arrière en position verrouillée pour pouvoir fermer
et verrouiller la porte.
40287-1307 7 18
®
POUR COMMENCER
No série :
Modèle QAS-450-B
FONCTIONS DE COMMANDE
1. Serrure à clé
2. Bouton DÉMARRAGE
3. Lecteur d’empreintes digitales
4. Voyant rouge
5. Voy