PDA Range 103 Installation Instructions Manual

Text of PDA Range 103 Installation Instructions Manual

INDUCTION LOOP AMPLIFIER

The PDA103 is a true current mode, audio-frequency induction loop amplifier. It may be surface-mounted and is designed to cover ticket counters up to 1.2m2 (PDA103C kit version), or rooms up to 50m2 (PDA103R/L/S kit versions). Safety guidelines, important notes and product safety notes........................................... 2 PDA103 kit contents ............................................................

Avoid placing the PDA103 amplifier in areas:

• with poor ventilation • exposed to direct sunlight • with high ambient temperatures • adjacent to heat generating equipment • with high humidity or dust levels • susceptible to severe vibration DO NOT dismantle or attempt to modify the amplifier. No user-serviceable fuses or parts are included inside the amplifier. For repair, contact your supplier. WARNING: The surface of this un

IMPORTANT: DO NOT power up the system before completing Step 7 below.

The amplifier MUST NOT be operated without a loop connected to it. Install the loop cable. BEFORE connecting the loop to the amplifier, use a multimeter to check the loop is not shorted to ground at any point. It WILL damage the amplifier if it is. Connect the loop cable (supplied) to the amplifier. Remove a

The amplifier mixes and amplifies the microphone, line, digital and outreach input signals

and feeds them through its sophisticated automatic gain control (AGC) circuitry before outputting them to the induction loop. OVERVIEW OF THE PDA103 INDUCTION LOOP AMPLIFIER 103 Loop DCin + - 14V to 20V Mic Line Digital Outreach Power On Loop Fault Peak Limit Level Metal Compensation 4 of 12 3* 9 10 11 12 4 2 1 8 7 5 6 Connectors, controls and indic

8 of 12

103 Loop DCin + - 14V to 20V Mic Line Digital Outreach Power On Loop Fault Peak Limit Level Metal Compensation TYPICAL PDA103S 50m2DOMESTIC TV/MUSIC LOUNGE LOOP SYSTEM 4 3 1 PDA103S Kit Components 1 AFILS sticker: Position the sticker where it can be clearly seen by hearing aid users. 2 APL dual phono line level ‘outreach’ plate c/w APS SCART lead & Belden connection cable: Surface-mount the APL plate onto a standard 25mm UK back box - a 6m len

If multiple counter loops are

required in close proximity, it is possible that the ‘field’ generated by one system may be picked up by a person who is standing at the next. Adjust the field strength and loop shape to avoid this. TYPICAL PDA103C 1.2m2 COUNTER LOOP SYSTEM MULTIPLE COUNTER LOOPS PDA103C Kit Components 1 AFILS sticker: Position the sticker where it can be clearly seen by hearing aid users. 2 AMT tie/desk microphone c/w 1.5m lead: Position

PDA Range Amplifier Owners Instructions: