IP Camera 3-AXIS Operation & User’s Manual

PRODUCT TO RAIN OR MISTURE. DO NOT INSERT ANY METALLIC OBJECT THROUGH VENTILATION GRILLS. CAUTION CAUTION RISK OF ELECTRIC SHOCK DO NOT OPEN CAUTION：TO REDUCE THE RISK OF ELECTRIC SHOCK. DO NOT REMOVE COVER (OR BACK). NO USER-SERVICEABLE PARTS INSIDE. REFER SERVICING TO QUALIFIED SERVICE PERSONNEL. COPYRIGHT THE TRADEMARKS MENTIONED IN THE MANUAL ARE LEGALLY REGISTERED TO THEIR RESPECTIVE COMPANIES. ...

III. PRODUCT INSTALLATION........................................................................................................... 6 A. MONITOR SETTING.....................................................................................................................................6 B. HARDWARE INSTALLATION AND I/O PIN ASSIGNMENT................................ ...

server which enables user to view real-time video via IE browser. It also supports simultaneously H.264/JPEG/ MPEG4 (3GPP Only) video compression with CMOS M-Pixel Sensor which provides smooth and high video quality. The video can be stored in the SD card, and can be playback remotely. 3-Axis IP Dome is an easy-to-use IP Camera which is designed for security application. II. Product Specifications z Support Video out z 2M CMOS Sensor z Power over Ethernet available z 3-Axis Gimbal Adjustments z H.264/ JPEG/ MPEG4 (3GPP only) compression z SD card backup z 2-wa ...

Yes (Optional) Power Consumption DC 12V 470mA Dimensions ∮132 * H 108.4 Network Ethernet 10/ 100 Base-T Network Protocol HTTP, TCP/ IP, SMTP, FTP, PPPoE, DHCP, DDNS, NTP, UPnP, 3GPP System Video Resolution 1600x1200, 1280x1024, 1280x960,1280x720, 800x600,640x480, 320x240, 176x144 Video Adjust Brightness, Contrast, Sharpness, BLC, Night Mode Triple Streaming Yes Image Snapshot Yes Full Screen Monitoring Yes Privacy Mask Yes, 3 different areas Compression Format H.264/ JPEG/ MPEG4 (3GPP only) Video Bitrates Adjust CBR, VBR Motion Detection Yes, 3 different areas Triggered Action Mail, FTP, Save to SD ca ...

Minimum Intel-C 2.8G, RAM: 512MB, Graphic card: 64MB *SPECIFICATIONS ARE SUBJECT TO CHANGE WITHOUT NOTICE. III. Product Installation A. Monitor Setting i. Right-Click on the desktop. Select “ Properties” ii. Change color quality to highest (32bit). ...

Assignment i. Connect a power adapter and IP Camera to PC or local network ii. I/O Control Instruction I/O terminal connector – used in application, for e.g., motion detection, event triggering, alarm notifications. It provides the interface to: 1 Digital Input (GND+Alarm) – An alarm input for connecting devices that can toggle between an open and closed circuit, for example: PIRs, door/window contacts, glass break detectors, etc. When a signal is received the state changes and the input becomes active. Relay output (COM +N.O.) / (COM+N.C.) – An output to Relay switch, for example: LEDs, Sirens, etc iii. ...

2. COM: (Common) 3. N.O. (Normally Open): Max. 1A, 24VDC or 0.5A, 125VAC iv. Relay 1. Digital Input connection GND ALARM N.C. COM N.O. Door/Window Contacts ALARM IN RELAY OUT ...

recommended Power over Ethernet (PoE) is a technology that integrates power into a standard LAN infrastructure. It enables power to be provided to the network device, such as an IP phone or a network camera, using the same cable as that used for network connection. It eliminates the need for power outlets at the camera locations and enables easier application of uninterruptible power supplies (UPS) to ensure 24 hours a day, 7 days a week operation. Ethernet PoE Switch PoE IP Camera PoE IP Camera Ethernet Cable Ethernet Cable ...

i. Use the software, “IP Installer” to assign the IP address of IP CAMERA. The software is in the attached software CD. ii. IP installer supports two languages a. IPInstallerCht.exe：Chinese version b. IPInstallerEng.exe：English version iii. There are 3 kinds of IP configuration. a. Fixed IP (Public IP or Virtual IP) b. DHCP (Dynamic IP) c. Dial-up (PPPoE) iv. Execute IP Installer v. For Windows XP SP2 user, it may popup the following message box. Please click “Unblock”. vi. IP Installer configuration: vii. IP Installer will search all IP Cameras connected on Lan. The user can click “Search Device” to search again. ...

configuration of this IP camera will show on the right side. You may change the “name” of the IP Camera to your preference (eg: Office, warehouse). Change the parameter and click “Submit” then click “OK”. It will apply the change and reboot the Device. ix. Please make sure the subnet of PC IP address and IP CAM IP address are the same. The same Subnet: IP CAM IP address: 192.168.1.200 PC IP address: 192.168.1.100 Different Subnets: IP CAM IP address: 192.168.2.200 PC IP address: 192.168.1.100 To Change PC IP address: Control PanelÆNetwork ConnectionsÆLocal Area Co ...

admin”. D. Install ActiveX control: For the first time to view the camera video via IE, it will ask you to install the ActiveX component. If the installation failed, please check the security setting for the IE browser. i. IE Æ Tools Æ Internet Options… Æ Security Tab Æ Custom Level… Æ Security Settings Æ Download unsigned ActiveX controlsÆ Select “Enable” or Prompt. ii. IE Æ Tools Æ Internet Options… Æ Security Tab Æ Custom Level… ÆInitialize and script ActiveX controls not marked as safe Æ Select “Enable” or Prompt. ...

Start a IE browser, type the IP address of the IP camera in the address field. It will show the following dialogue box. Key-in the user name and password. The default user name and password are “admin” and “admin”. When connect to the IP CAMERA。The following program interface shows. 1 2 3 4 5 6 7 ...

2. ：Video Snapshot 3. Show system time, video resolution, and video refreshing rate 4. Select video streaming source (When streaming 2 setting in『Video Setting』 is closed, this function will not display) 5. IP Camera supports 2-way audio. Click the “Chatting” check box. Then you can use microphone which connects to the PC to talk to server side, which is IP Camera side 6. Shows how many people connect to this IP camera 7. Control the relay which is connected to this camera. Double-click the video, it will change to full screen mode. Press “Esc” or double-click the video again, it will change ba ...

to go back to the live video page. ...

a. Server Information: Set up the camera name, select language, and set up the camera time. 1. Server Name：This is the Camera name. This name will show on the IP Installer. 2. Select language：There are English, Traditional Chinese, and Simplified Chinese to select. When change, it will show the following dialogue box for the confirmation of changing language. b. OSD Setting: Select a position where date & time stamp / text showing on screen. Moreover, click Text Edit can entry to adjust the OSD contents which is including Size and Alpha of text. Finally, click Upgrade button to reserve the setting. c. Server t ...

IP CAMERA supports three different users, administrator, general user, and anonymous user. a. Anonymous User Login： Yes：Allow anonymous login No：Need user name & password to access this IP camera b. Add user： Type the user name and password, then click “Add/Set”. c. Click “edit” or “delete” to modify the user. ...